Jumo 701150 DIN Rail Controller 2 Input, 4 Output Analogue 30V ac/dc Controller

모든 Temperature Controllers 열람하기

Subtotal (1 unit)*

₩1,336,717.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 3 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,336,717.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
278-983
제조사 부품 번호:
701150/8-01-0253-2001-25/005,058
제조업체:
Jumo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Jumo

Output Type

Analogue

Product Type

Controller

Number of Inputs

2

Number of Outputs

4

Maximum Current

3A

Minimum Operating Temperature

0°C

Maximum Operating Temperature

55°C

Terminal Type

Screw

Control Type

Controller

Maximum Supply Voltage

30V ac/dc

Diagnostics

Yes

Digital Comms

USB Interface

Auxiliary Power Supply

110/240 V ac

Maximum Voltage

240V

Display Type

LCD Backlight

Length

104.8mm

Standards/Approvals

DNV GL rules for classification, CAN/CSA-E60730-1, UL 60730-2-9, UL 60730-1, TP TC 020/2011, EAC TP TC 004/2011, DIN EN ISO 13849, DIN EN 61508, DIN EN 14597, CAN/CSA-E60730-2-9

IP Rating

IP20

Width

45 mm

Series

701150

Mount Type

DIN Rail

Input Type

Analogue

Panel Depth

89.4mm

COO (Country of Origin):
DE
The Jumo Configurable safety temperature limiter/ monitor according to DIN EN 14597 with 1oo2D architecture and SIL and PL approval is equipped with two universal analogue inputs and two relay outputs (pre- and limit value alarm) as well as a universal analogue output. The switching capacity of the relay contacts is AC 250 V, 3 A, 50 Hz (resistive load). The pre alarm is adjustable as absolute or as distance from the limit value. This occurs after the sensor temperature has fallen below the set limit value by the amount of the switching difference (setting: max-alarm). The automatic resetting is carried out with setting Min-Alarm after the sensor temperature has risen above the set limit value by the amount of the switching difference. When used as a safety temperature limiter STB (protection temperature limiter for heat generating plants), the reset is performed manually or with a tool. The power supply range is from AC/DC 20 to 30 V, 48 to 63 Hz.

Front side features an LC display with backlighting and plain text

Safety temperature limiter and monitor detect and prevent hazards early

Monitors thermotechnical processes and restores safe operation in case of faults

Analog input supports various sensors or standard signals

Limit exceedance is indicated by LEDs and relay output switches to a safe state

Meets DIN EN 61508 DIN EN 13849 and Machinery Directive 2006/42/EC

STW operates with automatic reset for heat-generating systems

관련된 링크들