- RS 제품 번호:
- 413-355
- 제조사 부품 번호:
- AAO20
- 제조업체:
- Eaton
105 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당가격(5개가 1팩안에)
₩20,393.493
수량 | 한팩당 | 한팩당* |
5 - 120 | ₩20,393.493 | ₩101,970.913 |
125 - 495 | ₩19,822.551 | ₩99,114.479 |
500 + | ₩19,006.673 | ₩95,035.09 |
*다른 단위에 대한 가격 표시 |
- RS 제품 번호:
- 413-355
- 제조사 부품 번호:
- AAO20
- 제조업체:
- Eaton
제정법과 컴플라이언스
해당 안됨
제품 세부 사항
Cooper Bussman Bolted Tag Fuse - British Standard
Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.
Features & Benefits
• The low-temperature rise enables the fuse to be suitable for high-density mounting applications
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88
Why use a slotted tag fuse?
A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.
Eaton British Standard Fuse, 20A, 550V AC AAO20
This British Standard fuse from Eaton prevents short circuits and current overload from damaging electrical systems. It reduces the risk of harm to sensitive electronic components, reducing downtime and improving productivity. The fuse is suitable for low-voltage 3-phase electrical systems, like those found in industrial engineering and automotive manufacturing applications. It's a tagged unit that offers quick and uncomplicated assembly with mounting brackets on either end to easily secure it into place. For ease of use, it combines consistently reliable performance with almost no maintenance requirements. You can use this fuse in high-density electrical systems thanks to its low temperature rise, which means it doesn't become excessively hot when exposed to high currents.
Low power loss for improved efficiency in an electrical system
Air-tight so not adversely affected by external environmental conditions for improved reliability
Air-tight so not adversely affected by external environmental conditions for improved reliability
How do I know if I've bought the right replacement fuse?
Eaton of fuses features a physical size or rejection feature that prevents you from replacing a fuse with one from another fuse class. This helps to ensure the correct replacement fuse is always installed and the voltage and interrupting ratings remain the same.
Note
Eaton formerly known as Bussmann
사양
속성 | 값 |
---|---|
Current Rating | 20A |
Fuse Size | A2 |
Voltage Rating | 550V ac |
Fuse Standard | BS 88, IEC 269 |
Fixing Centres | 73mm |
Application Category | gG |
Tag Width | 8.7mm |
High Rupture Capacity | Yes |
Overall Length | 85mm |
Tag Type | Bolted |
Body Diameter | 13.7mm |
Body Length | 35.5mm |
Tag Orientation | Offset |
Body Height | 35.5mm |
Fuse Dimensions | 13.7 x 35.5mm |
Series | Bussmann |