Eaton 6A British Standard Fuse A1 550V ac, 44.5 mm

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Tag Fuses 열람하기
대량 구매 할인 기용 가능
View bulk pricing options

Subtotal (1 pack of 5 units)*

₩248,240.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2027년 4월 23일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
한팩당*
5 - 120₩49,648.00₩248,240.00
125 - 495₩48,392.00₩241,960.00
500 +₩47,764.00₩238,820.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
413-282
제조사 부품 번호:
NITD6
제조업체:
Eaton
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Eaton

Current Rating

6A

Product Type

British Standard Fuse

Fuse Size

A1

Voltage

550V ac

Standards/Approvals

IEC 60269, BS 88

Fixing Centres

44.5 mm

Application Category

gG

Tag Width

11.2mm

High Rupture Capacity

Yes

Overall Length

55mm

Series

NITD

제외

Eaton British Standard Fuse, 6A, 550V AC NITD6


Need a general-purpose fuse? This safety-enhancing device from Eaton protects a wide variety of components against overcurrent and short circuits. It safeguards industrial electrical equipment and wiring systems and can be used in conjunction with circuit breakers to reduce the risk of damage, shocks and fires. The fast-acting fuse responds quickly to both high and low current faults by melting to break a circuit. It doesn't release harmful gases or smoke when it blows, so poses no safety risk to people. Its resistor is well sealed inside a cylindrical tube to ensure the fuse's function isn't adversely affected by external environmental conditions.

• Temperature-resistant housing so won't melt nearby cables if it blows

• Insensitive to aging for reduced maintenance and improved longevity

• Quick to install and remove, thanks to its bolted tags that easily slot into a fuse holder

What size is this fuse?


This fuse has a compact size that calls for minimal space on a distribution board. Its dimensions are 55 (L) x 34.6 (H) x 13.8mm (D).

What type of fuse is this?


This is a type F fuse, which means that it's a fast-blow component that quickly melts and breaks a circuit when a fault occurs.

Eaton Bussmann HRC Offset Tag Fuses - BS88 British Standard Fuses


Eaton Bussmann's offset tag fuses (or offset bolted tag fuses) are essentially a cylindrical fuse that is fitted with offset brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Eaton Bussmann's fuses are commonly found within a multitude of industrial and switchgear applications, electrical equipment, wiring systems and circuit breakers. This fuse range is suitable for general purpose use.

Features & Benefits


• The low-temperature rise enables the fuse to be suitable for high-density mounting

• Fuse links, specifically designed for the protection of equipment

• Conforms to industry standards

• Low voltage fuse

• High rupture capacity (HRC)

• Suitable for three-phase applications

• Suitable for type 2 co-ordinated applications as defined in IEC 947-4

• Low power loss, typically 20% lower than the requirements of BS 88

Why use a slotted tag fuse?


A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

Note

Eaton formerly known as Bussmann

관련된 링크들