Infineon TLE94613ESXUMA1 System-On-Chip 24-Pin TSDSO-24

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 System-On-Chips 열람하기
대량 구매 할인 기용 가능

Subtotal (1 pack of 2 units)*

₩8,535.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 2,888 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
2 - 8₩4,267.60₩8,535.20
10 - 98₩4,164.20₩8,328.40
100 - 248₩4,051.40₩8,102.80
250 - 498₩3,957.40₩7,914.80
500 +₩3,872.80₩7,745.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
244-2898
제조사 부품 번호:
TLE94613ESXUMA1
제조업체:
Infineon
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Infineon

Product Type

System-On-Chip

Mount Type

Surface

Package Type

TSDSO-24

Pin Count

24

Interface Type

LIN, CAN

Minimum Supply Voltage

-0.3V

Maximum Supply Voltage

28V

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

150°C

Standards/Approvals

ISO 11898-2:2016, RoHS

Width

0.95 mm

Height

3.9mm

Series

TLE9461-3ES

Length

8.65mm

Automotive Standard

AEC-Q101, AEC-Q100

The Infineon TLE94613ESXUMA1 device is designed for various CAN automotive applications as main supply for the microcontroller and as interface for a CAN bus network including the CAN Partial Networking feature. To support these applications, the System Basis Chip (SBC) provides the main functions, such as a 5 V lowdropout voltage regulator (LDO) for e.g. a microcontroller supply, another 5 V low-dropout voltage regulator with off-board protection for e.g. sensor supply, a HS-CAN transceiver supporting CAN FD and CAN Partial Networking (incl. FD tolerant mode) for data transmission, a high-voltage GPIO with embedded protective functions and a 16-bit Serial Peripheral Interface (SPI) to control and monitor the device.

Fully compliant to “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications” Revision 1.3, 2012-05-04

Charge pump-Output for N-channel MOSFET reverse-polarity protection with integrated spread spectrum modulation feature for optimum EMC performance

Universal High-Voltage Wake Input for voltage level monitoring and wake detection

General Purpose High-Voltage In- and Output (GPIO) configurable as Fail Output, Wake Input, Low-Side switch or High-Side switch

HIgh-Voltage Measurement Function as alternate pin assignment

Fail Outputs for Fail-Safe signalization

Configurable wake-up sources

Reset Output & Interrupt Output

관련된 링크들