STMicroelectronics Buck Converter, Surface, 38V Output Voltage, 2 A Output Current

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Switching Regulators 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
포장 옵션
RS 제품 번호:
225-0009P
제조사 부품 번호:
A6986ITR
제조업체:
STMicroelectronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

STMicroelectronics

Product Type

Buck Converter

Output Voltage 1

38V

Output Current

2A

Mount Type

Surface

Number of Outputs

1

Maximum Operating Temperature

150°C

Minimum Operating Temperature

-40°C

Series

A6986

Number of Pins

16

Package Type

HTSSOP-16

Width

6.6mm

Standards/Approvals

RoHS, AEC-Q100

Depth

1.2mm

Length

5.1mm

Maximum Input Voltage

40V

Minimum Input Voltage

4V

The STMicroelectronics 5 W synchronous iso-buck converter is an automotive grade device specifically designed for the isolated buck topology. The 100% duty cycle capability and the wide input voltage range meet the cold crank and load dump specifications for automotive systems. The primary output voltage can be accurately adjusted, whereas the isolated secondary output is derived by using a given transformer ratio. No optocoupler is required. The primary sink capability typically up to 1.9 A (even during soft-start) allows a proper energy transfer to the secondary side as well as enabling a tracked soft-start of the secondary output.

AEC-Q100 Grade 1 qualified

Designed for iso-buck topology

4 V to 38 V operating input voltage

Primary output voltage regulation / no optocoupler required

1.9 A typical sink Peak primary current capability

Peak current mode architecture in forced PWM operation

300 ns blanking time

관련된 링크들