Applied Motion Systems STM Series Dual Hybridge Stepper Motor 48V, 0.88Nm Torque, 1.8 °, 42 mm Frame, 6.35 mm Shaft
- RS 제품 번호:
- 877-7247
- 제조사 부품 번호:
- STM23IP-2EE
- 제조업체:
- Applied Motion Systems
Subtotal (1 unit)*
₩1,476,360.00
재고있음
- 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩1,476,360.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 877-7247
- 제조사 부품 번호:
- STM23IP-2EE
- 제조업체:
- Applied Motion Systems
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Applied Motion Systems | |
| Sub Type | Dual Hybridge | |
| Product Type | Stepper Motor | |
| Step Angle | 1.8° | |
| Holding Torque | 0.88Nm | |
| Voltage | 48V | |
| Frame Size | 42 mm | |
| Shaft Diameter | 6.35mm | |
| Current Rating | 5A | |
| Shaft Length | 18.4mm | |
| Depth | 92.4mm | |
| Standards/Approvals | CE EN61800-3:2004, RoHS Compliant | |
| Output Speed | 51200spm | |
| Series | STM | |
| 모두 선택 | ||
|---|---|---|
브랜드 Applied Motion Systems | ||
Sub Type Dual Hybridge | ||
Product Type Stepper Motor | ||
Step Angle 1.8° | ||
Holding Torque 0.88Nm | ||
Voltage 48V | ||
Frame Size 42 mm | ||
Shaft Diameter 6.35mm | ||
Current Rating 5A | ||
Shaft Length 18.4mm | ||
Depth 92.4mm | ||
Standards/Approvals CE EN61800-3:2004, RoHS Compliant | ||
Output Speed 51200spm | ||
Series STM | ||
- COO (Country of Origin):
- US
Integrated Steppers STM23IP
The STM23IP is an integrated Drive and Motor, fusing step motor and drive technologies into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions.
Drive + Motor + Control in one unit
4 quadrant controller
Dynamic Current Control
Anti-Resonance
Torque Ripple Smoothing
Microstep Emulation
Stall Prevention/Detection
NEMA 23 frame size
Input voltage 12-70 Vdc
3 digital input, 1 analog input
1 digital output
Ethernet and Ethernet/IP interface
Encoder
Operation Mode:
Step and direction
CW/CCW pulse
A/B quadrature pulse
velocity (oscillator, joystick)
streaming commands (SCL)
SiNet Hub compatible
Executes stored Q programmes
Applied Motion Systems - Stepper Motor
관련된 링크들
- Applied Motion Systems STM Series Dual Hybridge Stepper Motor 48V, 0.88Nm Torque, 1.8 °, 23 mm Frame, 6.35 mm Shaft
- Applied Motion Systems STM Series Dual Hybridge Stepper Motor 48V, 0.48Nm Torque, 1.8 °, 17 mm Frame, 5 mm Shaft
- Applied Motion Systems Stepper Motor Controller, 5 A
- Applied Motion Systems Stepper Motor Controller, 48V dc, 10A, Amplifier Function
- Applied Motion Systems Stepper Motor Controller, 48V, 0.1A, 10 A, Current Controller Function
- Applied Motion Systems Stepper Motor Controller, 48V dc, 0.3A, 2.2 A, Amplifier Function
- Applied Motion Systems Stepper Motor Controller, 48V dc, 0.1A, 5 A, Current Controller Function
- Applied Motion Systems Network Module for Use with ST10-Si, ST5-Si