SKF 36 Tooth Rough Stock Bore Sprocket, PHS 10B-1B36 12 B-2

모든 Sprockets 열람하기

Subtotal (1 unit)*

₩50,740.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩50,740.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-8788
제조사 부품 번호:
PHS 10B-1B36
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Number of Teeth

36

Bore Diameter

63mm

Product Type

Sprocket

Bore Type

Rough Stock Bore

Pitch Diameter

182.15mm

Material

Steel

Hub Diameter

100mm

Sprocket Width

35mm

Acceptable Chain Type

12 B-2

Maximum Inside Diameter

63mm

Standards/Approvals

EN, BS

COO (Country of Origin):
CN

SKF Sprocket, 36 Teeth, 182.15mm Pitch Diameter - PHS 10B-1B36


This sprocket is a steel transmission component designed to transfer rotary motion between chain and shaft in industrial equipment. It is manufactured with a rough-stock bore for on-site finishing and conforms to recognised EN and BS standards to suit heavy-duty installations.

Features and Benefits:


• 36-tooth profile for consistent chain engagement and load sharing
• 35mm width for sustained contact in high-load scenarios
• 182.15mm pitch diameter for precise chain alignment
• 100mm hub diameter to accommodate robust mounting arrangements
• Maximum inside diameter 63mm allowing for larger bore final machining
• Compatible with 12B-2 chain to ensure interchangeability with existing drives

Applications


• Suitable for replacement sprocket 36T 35mm width in conveyors
• Ideal for drive trains using 12 B-2 chain in manufacturing
• Used with industrial gearboxes requiring EN BS approved components
• Can be used for heavy machinery requiring 35mm wide sprockets
• Used for refurbishment where rough-stock bore sprocket requires machining

How is the bore prepared for final shaft fitting?


The bore is supplied in rough-stock form to allow finishing to the EXACT shaft tolerance during installation.

Which chain specification will mesh correctly with this component?


It is designed for 12B-2 chain engagement to match standard roller chain geometries.

What material properties are relevant for load capacity considerations?


The component is fabricated from steel to provide the necessary strength for industrial drive loads.

How does the hub geometry affect assembly options?


The 100mm hub diameter offers a substantial section for keyways, taper bushes, or bolted attachments as required.

What limitation does the maximum inside diameter impose on final machining?


The 63mm maximum inside diameter defines the largest achievable finished bore prior to any additional counterbore or rework.

관련된 링크들