SKF 36 Tooth Rough Stock Bore Sprocket, PHS 06B-1B36 06 B-1
- RS 제품 번호:
- 267-9071
- 제조사 부품 번호:
- PHS 06B-1B36
- 제조업체:
- SKF
Subtotal (1 unit)*
₩20,689.50
제조사가 재고 비축중
- 2026년 6월 11일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩20,689.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-9071
- 제조사 부품 번호:
- PHS 06B-1B36
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Sprocket | |
| Number of Teeth | 36 | |
| Bore Type | Rough Stock Bore | |
| Pitch Diameter | 109.29mm | |
| Material | Steel | |
| Hub Diameter | 70mm | |
| Sprocket Width | 30mm | |
| Acceptable Chain Type | 06 B-1 | |
| Maximum Inside Diameter | 48mm | |
| Standards/Approvals | BS EN | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Sprocket | ||
Number of Teeth 36 | ||
Bore Type Rough Stock Bore | ||
Pitch Diameter 109.29mm | ||
Material Steel | ||
Hub Diameter 70mm | ||
Sprocket Width 30mm | ||
Acceptable Chain Type 06 B-1 | ||
Maximum Inside Diameter 48mm | ||
Standards/Approvals BS EN | ||
- COO (Country of Origin):
- CN
SKF Sprocket, 36 Teeth, 109.29mm Pitch Diameter - PHS 06B-1B36
This sprocket is a steel transmission component designed to engage 06 B-1 roller chain in industrial power-transmission systems. It provides rotary motion transfer between shafts and chain runs in automation and mechanical assemblies, conforming to BS EN standards for dimensional compatibility and interchangeability.
Features and Benefits:
• 36 teeth ensure consistent pitch engagement and load distribution
• 109.29mm pitch diameter for accurate chain alignment and smooth motion
• 30mm width supports wider chain contact for reduced wear
• Replaceable bore option accommodates 14–48mm shafts for installation flexibility
• 70mm hub diameter offers secure mounting and torsional stability
• 109.29mm pitch diameter for accurate chain alignment and smooth motion
• 30mm width supports wider chain contact for reduced wear
• Replaceable bore option accommodates 14–48mm shafts for installation flexibility
• 70mm hub diameter offers secure mounting and torsional stability
Applications
• Suitable for conveyor drive trains in automated production lines
• Ideal for timing and indexing mechanisms in manufacturing equipment
• Used with 06 B-1 chain on material-handling systems
• Can be used for retrofitting drives in electrical actuator assemblies
• Ideal for timing and indexing mechanisms in manufacturing equipment
• Used with 06 B-1 chain on material-handling systems
• Can be used for retrofitting drives in electrical actuator assemblies
What bore arrangement allows adaptation to different shaft sizes?
It uses a rough-stock bore allowing machining or modification to fit shafts from 14mm up to 48mm as required on site.
How does the hub dimension influence mounting options?
The 70mm hub diameter provides a larger contact area for keyways or grub-screw fixation, improving resistance to torsional loads during start/stop cycles.
What material properties affect service life in industrial settings?
Constructed from steel, the component offers high fatigue strength and wear resistance under cyclic loading typical of automation applications.
Which chain type is compatible for correct meshing and performance?
It is intended for use with 06 B-1 roller chain to maintain proper pitch engagement and minimise chain elongation effects.
관련된 링크들
- SKF 29 Tooth Rough Stock Bore Sprocket, PHS 06B-1B29 06 B-1
- SKF 30 Tooth Rough Stock Bore Sprocket, PHS 06B-1B30 06 B-1
- SKF 27 Tooth Rough Stock Bore Sprocket, PHS 06B-1B27 06 B-1
- SKF 28 Tooth Rough Stock Bore Sprocket, PHS 06B-1B28 06 B-1
- SKF 34 Tooth Rough Stock Bore Sprocket, PHS 06B-1B34 06 B-1
- SKF 30 Tooth Rough Stock Bore Sprocket, PHS 06B-2B30 06 B-2
- SKF 26 Tooth Rough Stock Bore Sprocket, PHS 06B-1B26 06 B-1
- SKF 35 Tooth Rough Stock Bore Sprocket, PHS 06B-1B35 06 B-1