TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 10 AWG

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Splice Connectors 열람하기
대량 구매 할인 기용 가능

Subtotal (1 Bag of 1000 units)*

₩849,186.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 6월 10일 부터 21 개 단위 배송
  • 추가로 2026년 6월 17일 부터 28 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

Bag(s)
Per Bag
한팩당*
1 - 4₩849,186.00₩850.20
5 +₩832,221.00₩832.65

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
164-8972
제조사 부품 번호:
967398-000
제조업체:
TE Connectivity
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

TE Connectivity

Splice Type

Butt

Product Type

Splice Connector

Minimum Wire Size AWG

26AWG

Diameter

3.7mm

Insulation

Insulated

Maximum Wire Size AWG

10AWG

Colour

Red

Insulation Material

Nylon

Series

DuraSeal

Contact Material

Copper

Contact Plating

Tin

Termination Type

Crimp

Standards/Approvals

No

Splices


Red 0.25 - 1.6 mm²

Blue 1.0 - 2.6 mm²

Yellow 2.7 - 6.6 mm²

Duraseal Heatshrinkable


TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important

• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

관련된 링크들