TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 22 AWG
- RS 제품 번호:
- 533-673
- 제조사 부품 번호:
- DS-18-22-RS
- 제조업체:
- TE Connectivity
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 pack of 50 units)*
₩45,825.00
일시적 품절
- 2026년 8월 06일 부터 8,850 개 단위 배송
- 추가로 2027년 1월 07일 부터 33,100 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 50 - 450 | ₩916.50 | ₩45,825.00 |
| 500 - 1200 | ₩897.00 | ₩44,869.50 |
| 1250 - 4950 | ₩869.70 | ₩43,485.00 |
| 5000 - 7450 | ₩850.20 | ₩42,471.00 |
| 7500 + | ₩832.65 | ₩41,613.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 533-673
- 제조사 부품 번호:
- DS-18-22-RS
- 제조업체:
- TE Connectivity
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | TE Connectivity | |
| Splice Type | Butt | |
| Product Type | Splice Connector | |
| Overall Length | 36mm | |
| Diameter | 3.7mm | |
| Minimum Wire Size AWG | 18AWG | |
| Insulation | Insulated | |
| Maximum Wire Size AWG | 22AWG | |
| Colour | Red | |
| Insulation Material | Nylon | |
| Series | DuraSeal | |
| Contact Material | Copper | |
| Contact Plating | Tin | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 TE Connectivity | ||
Splice Type Butt | ||
Product Type Splice Connector | ||
Overall Length 36mm | ||
Diameter 3.7mm | ||
Minimum Wire Size AWG 18AWG | ||
Insulation Insulated | ||
Maximum Wire Size AWG 22AWG | ||
Colour Red | ||
Insulation Material Nylon | ||
Series DuraSeal | ||
Contact Material Copper | ||
Contact Plating Tin | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- MX
Red 22 → 18 AWG
Features and Benefits:
Colour is red - colour coded for easy identification of gauge sizes
Maximum wire size 1.5mm Dia.
0.5 to 1.0mm² CSA
Resistance to moisture and abrasion
Strain relief
Protection from wire pull out
Easy to install
Materials:
Insulative sleeve - polyamide with thermoplastic adhesive coating inside
Crimp splice – Tin plated copper alloy
Base metal – Copper
Applications:
These splice connectors are designed to splice tin plated or bare copper stranded wires with an insulation rated for at least 85 degrees C. Can be found in areas such as:
Automotive
Commercial wiring
Marine electronics
Splices
Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed
관련된 링크들
- TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 10 AWG
- TE Connectivity, DuraSeal Butt Wire Splice Connector, Red, Insulated, Tin 22 → 18 AWG
- TE Connectivity, DuraSeal Butt Splice Connector, Yellow, Insulated, Tin 10 AWG
- TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 10 AWG
- TE Connectivity, DuraSeal Butt Wire Splice Connector, Yellow, Insulated, Tin 16 AWG
- TE Connectivity, DuraSeal Butt Wire Splice Connector, Blue, Insulated, Tin 16 AWG
- Molex, 19199 Butt Crimp Butt Splice Terminal, Red, Insulated, Tin 18 AWG
- Molex, 19204 Butt Splice, Red, Insulated, Tin 18 AWG