GearWrench 11-Piece Crow Foot Spanner Set, 15/16 To 1 in, Alloy Steel

모든 Spanner Sets 열람하기

Subtotal (1 set)*

₩277,939.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 39 개 단위 배송 준비 완료
  • 추가로 2026년 3월 12일 부터 20 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Set(s)
Per Set
1 +₩277,939.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
182-004
제조사 부품 번호:
81908
제조업체:
GearWrench
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

GearWrench

Set Type

Torque Insert

Product Type

Crow Foot Spanner Set

Sizes in Set

15/16 To 1 in

Number of Pieces

11

Material

Alloy Steel

VDE/1000V Approved

No

Finish

Chrome

Standards/Approvals

No

제외

COO (Country of Origin):
TW

GearWrench 81908 11 Piece 3/8 Inch Drive Crowfoot SAE Spanner Set


The GearWrench 11-Piece. 3/8 in. Drive SAE Crowfoot Wrench set runs from size 3/8 in. to 1 in. It is perfect when a typical socket is too large or the application prevents you from getting over top of the fastener. This set is made from premium alloy CV Steel. A crowfoot wrench is a type of wrench designed to fit some of the same drive handles as the regular socket but non-cylindrical in shape, the ends are the same as those found on the open-end, box-end, or the flare-nut wrenches, these sockets use for use where space restrictions preclude the use of a regular socket. Also used in place of conventional open/box wrenches where the wrenches are large, so the crow's-foot wrench is much cheaper, or where space and weight are at a premium.

The GEARWRENCH Crowfoot Wrenches provide improved access to nuts and bolts located in hard to reach places or confined spaces. Used with an extension, these wrenches allow you to avoid obstructions which limit access or prevent the use of a ratchet, so you can get the job done.

Features and Benefits


Allows access to fasteners in confined spaces where a wrench or socket will not fit

Size markings are stamped on head for easy identification

Bright, full polish chrome finish easily wipes clean and resists corrosion

Included tray for storage and organization

Wrenches that fit a 3/8"" drive tang

Size stamped on sides and head

Supplied with blow mould tray

Contents: 3/8 in 7/16 in 1/2 in 9/16 in 5/8 in 11/16 in 3/4 in 13/16 in 7/8 in 15/16 in 1 in

Fastener Size 3/8 in 7/16 in 1/2 in 9/16 in 5/8 in 11/16 in 3/4 in 13/16 in 7/8 in 15/16 in 1 in

Drive Type: Crowfoot

Finish: Full Polish Chrome

End A Drive Type: Open End

End A Fastener Size: 3/8 in 7/16 in 1/2 in 9/16 in 5/8 in 11/16 in 3/4 in 13/16 in 7/8 in 15/16 in 1 in

End B Drive Type: Square

Material: Alloy Steel

관련된 링크들