e2s IS-MC1 Series Amber Sounder-Beacon Combination, IP65 28V dc Surface 100 dB @ 1m
- RS 제품 번호:
- 615-6907
- 제조사 부품 번호:
- IS-MC1-R/A
- 제조업체:
- e2s
Subtotal (1 unit)*
₩695,214.00
재고있음
- 41 개 단위 배송 준비 완료
- 추가로 2026년 5월 21일 부터 24 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩695,214.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 615-6907
- 제조사 부품 번호:
- IS-MC1-R/A
- 제조업체:
- e2s
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | e2s | |
| Product Type | Sounder-Beacon Combination | |
| Minimum Sound Level | 90dB | |
| Lens Colour | Amber | |
| Current Type | DC | |
| Light Effect | Flashing | |
| Sounder Type | Electronic | |
| Current Consumption | 93mA | |
| Mount Type | Surface | |
| Series | IS-MC1 | |
| Terminal Type | Screw | |
| Maximum Supply Voltage | 28V dc | |
| Bulb Type | LED | |
| Housing Colour | Red | |
| Sound Level at 1m | 100dB | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 60°C | |
| Maximum Sound Level | 100dB | |
| Hazardous Area Certification | ATEX | |
| Number of Tones | 49 | |
| IP Rating | IP65 | |
| Housing Material | ABS/Polycarbonate | |
| Standards/Approvals | EN60079-11:2012, EN IEC 60079-0:2018, IEC 60079-11:2011, IEC 60079-26:2014-10, IEC 60079-0:2017, IEC60079-26:2014 | |
| 모두 선택 | ||
|---|---|---|
브랜드 e2s | ||
Product Type Sounder-Beacon Combination | ||
Minimum Sound Level 90dB | ||
Lens Colour Amber | ||
Current Type DC | ||
Light Effect Flashing | ||
Sounder Type Electronic | ||
Current Consumption 93mA | ||
Mount Type Surface | ||
Series IS-MC1 | ||
Terminal Type Screw | ||
Maximum Supply Voltage 28V dc | ||
Bulb Type LED | ||
Housing Colour Red | ||
Sound Level at 1m 100dB | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 60°C | ||
Maximum Sound Level 100dB | ||
Hazardous Area Certification ATEX | ||
Number of Tones 49 | ||
IP Rating IP65 | ||
Housing Material ABS/Polycarbonate | ||
Standards/Approvals EN60079-11:2012, EN IEC 60079-0:2018, IEC 60079-11:2011, IEC 60079-26:2014-10, IEC 60079-0:2017, IEC60079-26:2014 | ||
제외
e2s Sounder Beacon
The e2s DC flashy sounder beacon with an amber LED has sound level outputs up to 100dB (A) at 1m. This device provides 49 alarm tones options and 3 remotely selectable stages. It requires 1 Zener barrier or galvanic isolator to running both sounder and beacon. Alternatively, the unit can be operated as an individual signal.
Note:
Installation can be powered from any certified Zener barrier or galvanic isolator. Only one of these is required to running both sounder and beacon.
Features and Benefits
The supply voltage is between 16VDC and 28VDC
Input overload and reverse current protection
Rated for zone 0,1 and 2, gas group IIC
End of line resistor certified
Array of 6 high intensity LEDs
Auto synchronised sound output
Prismatic lens optimises LED effectiveness
Available with custom tone configurations and frequencies
Operating temperature is between -40°C and +60°C
Certifications
EN50014, EN50020, EN50284
ATEX, IECEx, FM, GOST-R approved
관련된 링크들
- e2s IS-mC1 Minialert Series Red Sounder-Beacon Combination, IP65 28V dc Screw, Surface 100 dB @ 1m
- Klaxon IS Sonos Sounder Series Amber Sounder-Beacon Combination, IP66 24V Wall 105 dB @ 1m
- Moflash IS-SB Series Amber Sounder-Beacon Combination, IP66 28V Wall Mount 105 dB @ 1m
- Moflash YL4IS Series Amber, Red Sounder-Beacon Combination, IP65 24V dc Wall 100 dB @ 1m
- Pfannenberg PYRA Series Amber Sounder-Beacon Combination, IP66 100 dB @ 1m
- Clifford & Snell YL5IS Series Amber Beacon-Sounder Combination, IP65 3V dc Bulkhead Mount, Wall 105 dB @ 1m
- Clifford & Snell YO4IS Series Amber Beacon-Sounder Combination, IP65 26.4V dc Wall, Bulkhead 103 dB @ 1m
- RS PRO Amber Beacon-Sounder Combination, IP65 24V Base 105 dB @ 1m
