제조사부품번호

IXYS CPC1927 Series Solid State Relay, 2.7 A Load, PCB Mount, 250 V Load

RS 제품 번호:: 906-1085
제조사 부품 번호:: CPC1927J
제조업체:: IXYS

IXYS CPC1927 Series Solid State Relay, 2.7 A Load, PCB Mount, 250 V Load

Subtotal (1 unit)*

₩20,322.80

재고있음

144 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩20,322.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 906-1085
제조사 부품 번호:: CPC1927J
제조업체:: IXYS

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	IXYS
	Maximum Load Current	2.7A
	Product Type	Solid State Relay
	Mount Type	PCB
	Maximum Load Voltage	250V
	Series	CPC1927
	Terminal Type	PCB Terminal
	Contact Configuration	SPST
	Switching Function	No zero cross
	Minimum Operating Temperature	-40°C
	On State Resistance	0.2Ω
	Maximum Operating Temperature	85°C
	Package Type	ISOPLUS264
	Width	20.600 mm
	Height	26.2mm
	Standards/Approvals	UL508
	Length	19.9mm
	Off State Leakage Current	1μA
	Capacitance	1.1nF

	모두 선택
	브랜드 IXYS
	Maximum Load Current 2.7A
	Product Type Solid State Relay
	Mount Type PCB
	Maximum Load Voltage 250V
	Series CPC1927
	Terminal Type PCB Terminal
	Contact Configuration SPST
	Switching Function No zero cross
	Minimum Operating Temperature -40°C
	On State Resistance 0.2Ω
	Maximum Operating Temperature 85°C
	Package Type ISOPLUS264
	Width 20.600 mm
	Height 26.2mm
	Standards/Approvals UL508
	Length 19.9mm
	Off State Leakage Current 1μA
	Capacitance 1.1nF

CPC1927J Datasheet

COO (Country of Origin):: PH

1-Form-A OptoMOS Power Relay, CPC

These single pole solid state relays have normally open (1-Form-A) contacts. They feature a unique ISOPLUS-264 package giving the highest possible load current and power ratings. They are able to provide 2500 Vrms of input to output isolation by utilising optically coupled MOSFET technology.

The optically coupled outputs use the well-known OptoMOS architecture and are controlled by a highly efficient infrared LED. With a low on-resistance and a high load current rating these units are suitable for a wide variety of applications.

The unique ISOPLUS-264 package is manufactured with the silicon chip being soft soldered onto the Direct Copper Bond (DCB) substrate rather than the traditional copper lead frame. These DCB ceramics are what makes it possible to provide 2500 Vrms isolation but still offer a very low junction-to-case thermal resistance from only 0.3C per watt.

Potential Applications:

Industrial controls/motor control

Robotics

Medical equipment: Patient/equipment isolation

Instrumentation: Multiplexers, data acquisition, electronic switching and I/O subsystems

Energy meters

Transportation equipment

Aerospace/defence

Features

2.25 Arms load current with 5°C per watt heat sink

Low on-resistance

Selection of blocking voltages

2500 Vrms input/output isolation

Low thermal resistance

Isolated, low thermal impedance ceramic pad for heat sink applications

Low drive power requirements

Arc-free with no snubbing circuits

No EMI/RFI generation

Machine insertable, wave solderable

Ixys Solid State Relays, PCB Mount

Standards

UL 508 Certified Component: File E69938

IXYS CPC1927 Series Solid State Relay, 2.7 A Load, PCB Mount, 250 V Load

1-Form-A OptoMOS Power Relay, CPC

Ixys Solid State Relays, PCB Mount

Standards

관련된 링크들