Phoenix Contact DEK-OE- 24DC/24DC/100KHZ-G Series Solid State Relay, DIN Rail Mount, 300 V Load, 300V Control

모든 Solid State Relays 열람하기

Subtotal (1 unit)*

₩181,758.40

Add to Basket
수량 선택 또는 입력
재고있음
  • 13 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩181,758.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
801-8087
Distrelec 제품 번호:
304-11-384
제조사 부품 번호:
2964348
제조업체:
Phoenix Contact
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Phoenix Contact

Product Type

Solid State Relay

Mount Type

DIN Rail

Maximum Load Voltage

300V

Maximum Control Voltage

300V

Series

DEK-OE- 24DC/24DC/100KHZ-G

Terminal Type

Screw

Minimum Operating Temperature

-25°C

Maximum Operating Temperature

60°C

Length

56mm

Height

80mm

Width

6.2 mm

Standards/Approvals

RoHS

COO (Country of Origin):
CN

Phoenix Contact Optocoupler, 8mA - DEK-OE- 24DC/24DC/100KHZ-G - 2964348


Mount this optocoupler from Phoenix Contact on your control panel to isolate and protect equipment with different operating voltages. As it's a solid-state relay, it has a quick response time of 1μs (microsecond) and a fast electrical switching speed of 100kHz to protect your equipment quickly and efficiently. It uses surge protection and a suppressor diode to keep circuits and components safe, while a capacitor on the input side minimises signal interference for enhanced reliability.

Secure rear clips let you mount this optocoupler in any position on a DIN rail, with no spacing needed. It's slim and compact with a width of just 6.2mm, so it takes up minimal space on your distribution board. The LED (light-emitting diode) status indicator and labelled contacts mean it's simple to install and use.

Features & Benefits


• Screw connection method for a secure link

• Wide operating temperature range of -20°C to +60°C for use in a variety of demanding environments

• Isolation voltage of 2500V and forward voltage of 24V for use in high and low-power applications

• Accommodates wires ranging in size from 24 to 12AWG (American Wire Gauge) for increased versatility

Phoenix Contact Opto-Couplers with Solid State Relay Output


These DIN rail mount opto-couplers from Phoenix Contact provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment by electrically isolating its inputs, outputs, or both. The dc/ac and ac/dc versions also provide a means of interfacing (whilst isolating) ac and dc control voltages.

Features and Benefits


• Dc in/Dc out, Dc in/Ac out and Ac in/Dc out versions available

• Versions with switching speeds up to 100kHz available

• 2.5kVac input to output isolation

• LED status indication

• Module width 6.2mm

• Operating temperature range: -20 to +60°C

Standards

IEC 60 664, IEC 60 664A, DIN VDE 0110

관련된 링크들