Weller XT GW3 0.8 mm Gull Wing Soldering Iron Tip for use with WXP120, WP120
- RS 제품 번호:
- 801-4785
- 제조사 부품 번호:
- T0054473999
- 제조업체:
- Weller
Subtotal (1 unit)*
₩26,540.00
재고있음
- 추가로 2026년 10월 12일 부터 119 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩26,540.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 801-4785
- 제조사 부품 번호:
- T0054473999
- 제조업체:
- Weller
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Weller | |
| Product Type | Soldering Iron Tip | |
| Tip Shape | Gull Wing | |
| Model Number | XT GW3 | |
| For Use With | WXP120, WP120 | |
| Tip Series | XT | |
| Tip Width | 0.8 mm | |
| Standards/Approvals | UPC | |
| 모두 선택 | ||
|---|---|---|
브랜드 Weller | ||
Product Type Soldering Iron Tip | ||
Tip Shape Gull Wing | ||
Model Number XT GW3 | ||
For Use With WXP120, WP120 | ||
Tip Series XT | ||
Tip Width 0.8 mm | ||
Standards/Approvals UPC | ||
Weller Soldering Iron Tip, 0.8mm Tip Width, Gull Wing Tip Shape - T0054473999
This soldering iron tip is a gull‑wing‑shaped replacement designed for fine SMD soldering tasks. It connects with compatible handheld soldering tools and is intended for precision work on small leads and surface‑mount connections in workshop or production environments.
Features and Benefits:
• 0.8mm width supports fine‑pitch solder joints
• Gull‑wing profile facilitates access to SMD lead forms
• UPC approval confirms conformity with specified standards
• Compatible with WXP120 and WP120 for direct interchangeability
• Gull‑wing profile facilitates access to SMD lead forms
• UPC approval confirms conformity with specified standards
• Compatible with WXP120 and WP120 for direct interchangeability
Applications
• Suitable for reworking gull‑wing SMD components
• Ideal for precision lead‑form soldering on small packages
• Used with WXP120 stations for maintenance tasks
• Can be used for WP120‑equipped bench units in production
• Ideal for precision lead‑form soldering on small packages
• Used with WXP120 stations for maintenance tasks
• Can be used for WP120‑equipped bench units in production
Which tip geometry aids solder transfer on surface‑mount leads?
The gull‑wing form concentrates heat along the outer lead edge to improve wetting during solder flow.
How does the tip width affect thermal behaviour?
A 0.8mm contact area reduces thermal mass, enabling faster heat delivery and quicker recovery on small joints.
What tool compatibility should be checked before fitting?
Ensure the handle or iron accepts the same interchangeable tip mount as supplied with the intended station model.
Are there particular tasks this tip is optimised for?
It is optimised for precise rework and soldering of gull‑wing leads where restricted access and controlled heat are required.
Note
Weller recommends the use of Weller-branded solder wire to achieve the best soldering performance and maximise the service life of your Weller soldering products.
관련된 링크들
- Weller XNT GW1 1.6 mm Gull Wing 33 mm Soldering Iron Tip for use with WP65, WTP90, WXP90, WXP65
- Weller LT GW2 3.5 mm Gull Wing 18 mm Soldering Iron Tip for use with WSFP/WSP80/WP80/WXP80, LR21/TCPS last generation
- Weller LT GW1 1.4 mm Gull Wing 18 mm Soldering Iron Tip for use with LR21/TCPS last generation, WSFP/WSP80/WP80/WXP80
- Weller XT GW2 3.5 mm Mini-Wave 37 mm Soldering Iron Tip for use with WXP120, WP120
- Weller XT GW1 2.3 mm Mini-Wave 36.5 mm Soldering Iron Tip for use with WXP120, WP120
- Weller XT D 45 5 mm Screwdriver Soldering Iron Tip for use with WP120, WXP120
- Weller XT KN 2 mm Knife 45 mm Soldering Iron Tip for use with WXP120, WP120
- Weller XT O 1 mm Conical 37 mm Soldering Iron Tip for use with WXP120, WP120