PR Electronics MINI MCR-SL-IDS-I-I Series Signal Conditioner, Current Input, Current Output, ATEX
- RS 제품 번호:
- 796-7102
- 제조사 부품 번호:
- 3185A1
- 제조업체:
- PR Electronics
Subtotal (1 unit)*
₩229,160.00
재고있음
- 19 개 단위 배송 준비 완료
- 추가로 2026년 11월 24일 부터 8 개 단위 배송
- 추가로 2026년 12월 02일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩229,160.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 796-7102
- 제조사 부품 번호:
- 3185A1
- 제조업체:
- PR Electronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | PR Electronics | |
| Product Type | Signal Conditioner | |
| Input Signal Type | Current | |
| Output Signal Type | Current | |
| Input Range | 0 → 23 mA | |
| Output Range | 0 → 23 mA | |
| Hazardous Area Certification | ATEX | |
| Mount Type | DIN Rail | |
| Maximum Operating Temperature | 70°C | |
| Minimum Operating Temperature | -25°C | |
| Terminal Type | Screw | |
| IP Rating | IP20 | |
| Standards/Approvals | Zone 2, Zone 2-DIV 2, DNV-GL / EU-RO marine, ATEX, FM, NE 21, NE 43, DNV-GL, IECEX, EAC, UL 61010 / 508 | |
| Series | MINI MCR-SL-IDS-I-I | |
| 모두 선택 | ||
|---|---|---|
브랜드 PR Electronics | ||
Product Type Signal Conditioner | ||
Input Signal Type Current | ||
Output Signal Type Current | ||
Input Range 0 → 23 mA | ||
Output Range 0 → 23 mA | ||
Hazardous Area Certification ATEX | ||
Mount Type DIN Rail | ||
Maximum Operating Temperature 70°C | ||
Minimum Operating Temperature -25°C | ||
Terminal Type Screw | ||
IP Rating IP20 | ||
Standards/Approvals Zone 2, Zone 2-DIV 2, DNV-GL / EU-RO marine, ATEX, FM, NE 21, NE 43, DNV-GL, IECEX, EAC, UL 61010 / 508 | ||
Series MINI MCR-SL-IDS-I-I | ||
- COO (Country of Origin):
- DK
PR Electronics 3185 Loop Powered Isolator
3185 type is a 1 or 2 channel input loop powered isolator. Inputs and outputs are floating and galvanically separated. The converter eliminates ground loops and can be used for measuring floating signals. Also provides surge suppression and protects control systems from transients and noise.
Features and Benefits
• High basic 0.05% accuracy in all available signal ranges;• 2.5 kVAC isolation and have excellent noise immunity;• NAMUR NE21 burst A criteria;• Transmits rapid changes in process measurements to PLC/DCS for fast and accurate monitoring of critical signals;• Low temperature coefficient better than 0.01% / °C in a wide -25 to +70°C ambient temperature range for precise measurements ;• Long term accuracy better than 0.1% / 3 years with no need for re-calibration;• Installation in ATEX Ex zone 2 / IECEx Zone 2 / FM division 2
DIP-switch programming
Re-calibration is not needed after changing the DIP-switch range settings. Just change the DIP-switch, cycle the power to the unit and obtain the new, pre-calibrated I/O range. HART programming is enabled for selected devices.
Mounting
Devices can be mounted both vertically and horizontally with no air gap separation required. The devices snap onto a power rail or DIN rail and are easily detached by lifting the bottom lock.
High level of isolation
Safe galvanic isolation of 2.5 kVAC provides high noise immunity and prevents ground loops for accurate delivery of the process signal to your control system.
Device status indicators
A front LED indicates device status, e.g. an error in the set-up, sensor or hardware.
Over voltage- / polarity protection
All terminals can withstand up to ±31.2 VDC and are protected against incorrect supply wiring to ensure safe, error-free installation.
PR Electronics DIN Rail Mounting
관련된 링크들
- Phoenix Contact MACX MCR-SL-RPSS-2I-2I Series Signal Conditioner, Current Input, Current Output, 30V Supply, ATEX
- Phoenix Contact MACX MCR-SL-I-I-HV-ILP-SP Series Signal Conditioner, Current Input, Current Output, 30V Supply, ATEX
- Phoenix Contact MACX MCR-SL-2I-2I-HV-ILP Series Signal Conditioner, Current Input, Current Output, 30V Supply, ATEX
- Phoenix Contact MACX MCR-SL-RPSS-2I-2I-SP Series Signal Conditioner, Current Input, Current Output, 30V Supply, ATEX
- Phoenix Contact MINI MCR Series Signal Conditioner, Current Input, Current Output, 18V Supply, ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner, Current Input, Current Output, 30.5V Supply, ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner, Current Input, Current Output, 30V dc Supply, ATEX
- PR Electronics 3100 Series Loop Powered Isolator, Current Input, Current Output, ATEX
