Phoenix Contact MACX MCR Series Signal Conditioner, Current/Voltage Input, Current Output, 30V dc, 8 V dc Supply, ATEX
- RS 제품 번호:
- 196-0434
- 제조사 부품 번호:
- 2902063
- 제조업체:
- Phoenix Contact
Subtotal (1 unit)*
₩326,220.00
재고있음
- 2 개 단위 배송 준비 완료
- 추가로 2026년 11월 27일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩326,220.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 196-0434
- 제조사 부품 번호:
- 2902063
- 제조업체:
- Phoenix Contact
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Phoenix Contact | |
| Product Type | Signal Conditioner | |
| Input Signal Type | Current/Voltage | |
| Output Signal Type | Current | |
| Input Range | 2 → 40 mA, 50 mV → 30 V | |
| Output Range | 4 → 20 mA | |
| Supply Voltage | 30V dc, 8V dc | |
| Hazardous Area Certification | ATEX | |
| Mount Type | DIN Rail | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 70°C | |
| Terminal Type | Push-in | |
| IP Rating | IP20 | |
| Standards/Approvals | UL | |
| Series | MACX MCR | |
| 모두 선택 | ||
|---|---|---|
브랜드 Phoenix Contact | ||
Product Type Signal Conditioner | ||
Input Signal Type Current/Voltage | ||
Output Signal Type Current | ||
Input Range 2 → 40 mA, 50 mV → 30 V | ||
Output Range 4 → 20 mA | ||
Supply Voltage 30V dc, 8V dc | ||
Hazardous Area Certification ATEX | ||
Mount Type DIN Rail | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 70°C | ||
Terminal Type Push-in | ||
IP Rating IP20 | ||
Standards/Approvals UL | ||
Series MACX MCR | ||
- COO (Country of Origin):
- DE
Phoenix Contact Signal Conditioner, Output Loop-Powered 2-Way Isolator Type, 30V Maximum Input Voltage - MINI MCR-2-UI-I-OLP-PT - 2902063
Looking for a device that can convert electronic signals? Take charge with this Phoenix Contact signal conditioner. When supplied with inputs between 0 and 40mA, it manipulates them into outputs with a maximum current of 32mA. This lets you prepare your transmissions so they're easier to process later down the line in your network. For a fast and flexible setup, the unit uses a push-in method and is mountable in any position.
Humidity is no problem for this product, as it's built to withstand 5 to 95% RH. This makes it suitable for damp areas that experience high levels of non-condensing water vapour. Plus, its PBT housing is resistant to chemicals for a longer service life in heavy-duty applications. You can get an easy handle on the unit, without worrying about shocks, as it has an IP20 rating.
• Configurable input to allow for greater versatility
• Compact dimensions of 6.2 (W) x 110.5 (H) x 120.5mm (D) make this a space-saving component
• Broad operating temperature range between -40 and +70°C for use in challenging environments
• Overvoltage category II rating for protection from unplanned voltage surges
Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of unipolar and bipolar analog signals. Input configurable via DIP switch. Push-in connection technology, standard configuration. Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation, conversion, and filtering of analog signals. The output loop-powered isolator allows operation at an active analog input module. The device is supplied via the current loop of the controller. On the input side, standard analog signals and non-standard analog signals can be connected, ranging from 2 mA or 50 mV up to 40 mA or 30 V. These are converted to 4 mA ... 20 mA signals. You can configure the input signals via DIP switches. The measuring transducer supports NFC communication.
관련된 링크들
- Phoenix Contact MACX MCR Series Signal Conditioner, Current Input, Current Output, 30V dc Supply, ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner, Current/Voltage Input, Relay Output, 24V dc Supply, ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner, Voltage, Thermocouple Input, Current Output, 24V dc Supply, ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner, Voltage Input, Current/Voltage Output, 24V dc Supply, ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner, Current Input, Current Output, 30.5V Supply, ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner, Current Input, Current Output, 19.2V dc, 30 V dc Supply, ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner, Current Input, Current Output, 30V dc, 9.6 V dc Supply, ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner, RTD, Potentiometer Input, Current Output, 24V dc Supply, IECEx, ATEX
