SICK CDB650 Series I/O Module, 5 Port, RS422, RS485, CAN, RS232

모든 Sensor Connectivity 열람하기

Subtotal (1 unit)*

₩549,843.60

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 5월 25일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩549,843.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
284-9205
제조사 부품 번호:
CDB650-204
제조업체:
SICK
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SICK

Product Type

I/O Module

Inlet Connection Type

M12

Number of Ports

5

Maximum Operating Voltage

30V dc

Series

CDB650

Interface Type

RS422, RS485, CAN, RS232

Housing Material

Polycarbonate

IP Rating

IP65

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

50°C

Standards/Approvals

cULus certificate, UK declaration of conformity, CHINA-RoHS, ETIM, UNSPSC, ACMA declaration of conformity, EU declaration of conformity, 4Dpro, CE, eClass, EAN

Number of Ways

5

Output Type

Digital

Minimum Operating Voltage

10V

COO (Country of Origin):
HU

Overview


The 4DproConnectivity Connection Device Basic, part of the CDB650 sub product family, supports a range of products including the Lector series, CLV62x - CLV64x (depending on type), CLV69x, RFID read/write devices, and InspectorP series. It facilitates the connection of one sensor with 2 A fuse, featuring 5 cable glands and an RS-232 interface to the sensor via an M12, 17-pin female connector. All outputs are available on screw/spring-loaded terminals for convenient connectivity. The Connection Device Basic offers a versatile array of options for swiftly connecting a single 4Dpro sensor, whether through the SICK CAN sensor network, host PCs, or PLCs, adhering strictly to industrial standards. Both the sensor and the connection module fulfil IP 65 enclosure rating requirements, ensuring protection against dust and water spray.

Moreover, the CDB is compatible with the CMC600 parameter cloning module, facilitating seamless parameter storage. When installed in the provided slot, the CDB stores all parameters of the connected 4Dpro sensor. Consequently, during sensor replacement, all application-specific parameters are effortlessly transferred to the new 4Dpro sensor of the same type, streamlining the process and ensuring continuity of functionality.

At a glance


Connection module for one 4Dpro sensor

Clearly visible, easily accessible screw- and spring-loaded terminals

Connection diagram on the inside of the lid

Configuration with switches

IP 65 connection for one 4Dpro sensor using standard connection cable

Basis for CMC600 parameter cloning module

Service plug for direct access to the AUX interface

Your Benefit


Compact design fits into small spaces

Two mounting holes for fast, precise installation saves on installation costs

Clearly labeled, easily accessible screw- and spring-loaded terminals save time when connecting to peripherals

Quick, easy configuration with switches reduces installation time

Industrial-standard connection guarantees a reliable application solution

CMC600 parameter cloning module allows rapid exchange and replacement of connected sensors

Applications


관련된 링크들