SICK Female 4 way M8, Straight to Unterminated 4 way Unterminated Connector Cable, 20 m

Subtotal (1 unit)*

₩53,547.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 5월 18일 부터 37 개 단위 배송
  • 추가로 2026년 7월 15일 부터 26 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩53,547.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
285-9202
제조사 부품 번호:
YF8U14-200VA3XLEAX / 2095891
제조업체:
SICK
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SICK

Series

YF8U14

Product Type

Connector Cable

Jacket Colour

Grey

Jacket Material

Polyvinyl Chloride

Cable Length

20m

Number of Contacts A

4

Connector Gender A

Female

Connector Type A

M8, Straight

Connector Type B

Unterminated

Number of Contacts B

4

Connector Gender B

Unterminated

Voltage

60V ac/dc

IP Rating

IP65, IP66K, IP67

Standards/Approvals

Flame retardant according to UL 1581, Horizontal flame test/CSA FT2 / IEC 60332-1, IEC 60332-2-2, UL E335179

Coding

A

COO (Country of Origin):
CZ

Sick YF8U14 Series Connector and Cable, 20m Cable Length, Grey Jacket - YF8U14-200VA3XLEAX / 2095891


This connector and cable assembly is a 4-contact sensor lead designed to link automation devices to open-ended wiring. It pairs a straight M8 female connector with unterminated flying leads in a single 20m grey PVC-jacketed cable, offering a weather-resistant Interface for industrial sensor and actuator circuits at up to 60V DC.

Features & Benefits


• IP65/IP66K/IP67 rated enclosure ensures protection in harsh environments
• 4A current capacity supports typical sensor and actuator loads
• 0.25mm² conductors provide Compact flexibility for tight routing
• PVC jacket and TPU connector resist chemical exposure in zones with chemicals
• Flexible use temperature range from −5 °C to +80 °C enables varied operating conditions

Applications


• Suitable for connection of proximity sensors to control cabinets on production lines
• Ideal for linking actuators in mobile machinery with open-ended termination
• Used for sensor interfacing in wash‑down or high-pressure cleaning areas
• Can be used for field wiring where a straight M8 female plug is required
• Suitable for retrofitting existing 60V DC sensor networks with unterminated ends

What is the conductor arrangement at the unterminated end?


The cable contains four colour-coded cores in brown, white, blue and black to match common sensor wiring.

How is the connector secured to mating devices?


The M8 plug uses a screw-type locking nut MADE from nickel-plated zinc die-cast with a 9mm width across flats and a recommended torque of 0.4 N·m.

Is the cable shielded for noise suppression?


No, the conductors are unshielded

the assembly is intended for general sensor/actuator signals where shielding is not specified.

What electrical test voltages apply to the cable?


The cable is rated for 300V nominal and has been tested to 2,000V AC with a rated impulse voltage of 1.5 kV.

관련된 링크들