SKF Nitrile Rubber (NBR) Radial Shaft Seal, 75 mm ID, 100 mm OD, 12 mm

모든 Seals 열람하기

Subtotal (1 pack of 10 units)*

₩73,620.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 12일 부터 40 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 +₩7,362.00₩73,620.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-3859
제조사 부품 번호:
75X100X12 HMS5 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Inside Diameter

75mm

Product Type

Radial Shaft Seal

Outside Diameter

100mm

Seal Type

Rotary Shaft Seal

Thickness

12mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 75mm Inside Diameter, 100mm Outside Diameter - 75X100X12 HMS5 RG


This radial shaft seal provides fluid retention and contaminant exclusion for rotary shafts in mechanical assemblies. It is intended for use where a sealing element must run against a rotating journal to maintain lubrication and prevent ingress, suited to industrial shaft sealing applications.

Features and Benefits:


• Nitrile rubber material resists common oils and greases
• Rotary seal design accommodates shaft rotation and axial movement
• 12mm thickness offers robust contact and sealing engagement
• Durable construction supports continuous shaft operation
• Compatibility with standard shaft housings simplifies replacement

Applications


• Suitable for industrial gearboxes requiring oil retention
• Used with bearings to prevent lubricant leakage
• Ideal for rotating pump shafts in fluid systems
• Can be used for motor shaft sealing in machinery
• Suitable for maintenance replacement in plant equipment

What are the key material properties relevant to sealing oils?


The lip is formed from nitrile rubber which provides resistance to petroleum-based lubricants and typical industrial greases.

How does the seal integrate with existing shaft assemblies?


It fits over a rotating journal and runs with radial contact to retain lubricant and exclude contaminants from the bearing interface.

What thickness characteristics affect service life?


A 12mm cross-section increases contact area and structural support, helping maintain lip conformity under operating loads.

How should the component be matched to a shaft for replacement?


Select a seal with the same internal and external dimensions and material so the lip fits the shaft diameter and housing bore for proper sealing.

What operational behaviour is expected during continuous rotation?


The rotary lip maintains a dynamic seal during shaft rotation while allowing axial and slight radial movement without losing retention.

관련된 링크들