SKF Nitrile Rubber (NBR) Radial Shaft Seal, 130 mm ID, 160 mm OD, 12 mm

모든 Seals 열람하기

Subtotal (1 pack of 5 units)*

₩92,320.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 12일 부터 15 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
5 +₩18,464.00₩92,320.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
266-8883
제조사 부품 번호:
130X160X12 HMS5 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Radial Shaft Seal

Inside Diameter

130mm

Outside Diameter

160mm

Seal Type

Rotary Shaft Seal

Thickness

12mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 130mm Inside Diameter, 160mm Outside Diameter - 130X160X12 HMS5 RG


This radial shaft seal provides rotary sealing for shafts in rotating equipment where fluid exclusion is required. It is constructed from nitrile rubber and is intended for use as a shaft sealing element in machinery that requires a resilient sealing lip to control lubricant retention and contaminant exclusion.

Features and Benefits:


• Nitrile rubber material offers resistance to common oils
• Rotary design supports continuous shaft rotation
• 12 mm section thickness improves contact stability
• Designed for 130 mm internal fitment to shaft surfaces
• 160 mm external profile aids secure housing location

Applications


• Suitable for automotive driveline and gearbox assemblies
• Used with industrial motors and gear units
• Ideal for hydraulic pump shaft sealing tasks
• Can be used for replacement in rotating machinery
• Used for maintenance of transmission and axle systems

What material properties affect compatibility with lubricants?


The seal is MADE from nitrile rubber which provides resistance to many mineral oils and common lubricants found in mechanical systems.

How should the sealing component be matched to a shaft?


It should be installed on a shaft with a 130 mm diameter to ensure correct radial interference and sealing contact.

What housing requirement ensures proper installation?


The outer profile measures to fit a 160 mm bore so the housing should accommodate that external diameter for correct retention.

How does thickness influence performance during operation?


The 12 mm thickness contributes to sealing stability and supports the sealing lip under rotational loads.

Is this suitable for rotating oil containment applications?


Yes, the design is intended for rotary oil-sealing tasks in machines where fluid retention around a turning shaft is required.

관련된 링크들