SKF Nitrile Rubber (NBR) Radial Shaft Seal, 58 mm ID, 80 mm OD, 10 mm
- RS 제품 번호:
- 267-3733
- 제조사 부품 번호:
- 58X80X10 HMSA10 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩51,840.00
재고있음
- 추가로 2026년 10월 12일 부터 10 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩5,184.00 | ₩51,840.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-3733
- 제조사 부품 번호:
- 58X80X10 HMSA10 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 58mm | |
| Product Type | Radial Shaft Seal | |
| Outside Diameter | 80mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 10mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 58mm | ||
Product Type Radial Shaft Seal | ||
Outside Diameter 80mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 10mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 58mm Inside Diameter, 80mm Outside Diameter - 58X80X10 HMSA10 RG
This radial shaft seal is designed to provide radial sealing for rotary shafts in mechanical assemblies, preventing fluid escape and ingress in dynamic shaft applications. Constructed from nitrile rubber, it serves as a contact seal installed around a rotating Axis to maintain system integrity in industrial environments.
Features and Benefits:
• Nitrile material resists oil exposure for extended service life
• Rotary design accommodates continuous shaft rotation without leakage
• Thin 10mm cross-section reduces axial space requirement
• Robust sealing lip maintains contact under rotational motion
• Balanced geometry minimises heat build-up during operation
• Rotary design accommodates continuous shaft rotation without leakage
• Thin 10mm cross-section reduces axial space requirement
• Robust sealing lip maintains contact under rotational motion
• Balanced geometry minimises heat build-up during operation
Applications
• Suitable for rotating pump shaft sealing in hydraulic systems
• Used with gearboxes requiring oil-retention on shafts
• Ideal for rotating couplings in industrial machinery
• Can be used for motor shaft protection against contaminants
• Applicable where maintenance-friendly replacement Seals are needed
• Used with gearboxes requiring oil-retention on shafts
• Ideal for rotating couplings in industrial machinery
• Can be used for motor shaft protection against contaminants
• Applicable where maintenance-friendly replacement Seals are needed
What shaft size does it fit?
It fits shafts with a 58mm inner diameter.
What outer component size is required for installation?
The housing bore should accommodate an 80mm outer diameter.
How thick is the seal body for axial fitting considerations?
The seal has a thickness of 10mm for axial space planning.
What elastomer is the sealing element MADE from?
The sealing element is manufactured from nitrile rubber.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 58 mm ID, 80 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 58 mm ID, 80 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal, 38 mm ID, 58 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 35 mm ID, 58 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 40 mm ID, 58 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 36 mm ID, 58 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 58 mm ID, 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 38 mm ID, 58 mm OD, 8 mm