SKF Nitrile Rubber (NBR) Seal, 45 mm ID, 58 mm OD, 7 mm

모든 Seals 열람하기

Subtotal (1 pack of 10 units)*

₩26,403.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 6월 15일 부터 30 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 +₩2,640.30₩26,403.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
266-9218
제조사 부품 번호:
45X58X7 HMSA10 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Seal

Seal Type

Rotary Shaft Seal

Thickness

7mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Seal, 45mm Inside Diameter, 58mm Outside Diameter - 45X58X7 HMSA10 RG


This seal serves as a rotary shaft sealing element designed to prevent fluid leakage and exclude contaminants in rotating assemblies within industrial equipment. It is intended for use where a resilient lip material is required to maintain contact with a shaft while operating in mechanical and electromechanical systems.

Features and Benefits:


• Nitrile rubber construction resists oil and hydrocarbons • Rotary shaft design maintains dynamic sealing under rotation • 7mm section thickness gives stable axial support • 45mm bore ensures accurate shaft fit for consistent sealing • 58mm outer form fits housings with minimal play

Applications


• Suitable for hydraulic pump shaft sealing in automation • Ideal for motor and gearbox rotary sealing in electronics manufacturing • Used with rotating bearings in electrical motor assemblies • Can be used for shaft sealing in mechanical transmission systems

What material properties affect chemical compatibility?


The lip compound is nitrile rubber which offers resistance to many oils and common hydrocarbons but has limited compatibility with strong acids, ketones and certain fuels.

How does the seal accommodate shaft runout or misalignment?


The flexible elastomeric lip tolerates small radial runout and light misalignment while maintaining contact pressure against the shaft to preserve the fluid barrier.

What installation considerations ensure effective performance?


Correct interference between bore and housing, careful alignment of the shaft, and avoiding damage to the sealing lip during fitting are essential for optimal operation.

How does the seal behave under rotary motion?


The geometry is intended for dynamic service where the sealing lip maintains a sliding contact to control leakage and prevent ingress of particulates.

관련된 링크들