SKF Nitrile Rubber (NBR) Radial Shaft Seal, 36 mm ID, 47 mm OD, 7 mm
- RS 제품 번호:
- 267-3508
- 제조사 부품 번호:
- 36X47X7 HMSA10 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩32,640.00
재고있음
- 60 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩3,264.00 | ₩32,640.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-3508
- 제조사 부품 번호:
- 36X47X7 HMSA10 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 36mm | |
| Product Type | Radial Shaft Seal | |
| Outside Diameter | 47mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 7mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 36mm | ||
Product Type Radial Shaft Seal | ||
Outside Diameter 47mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 7mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 36mm Inside Diameter, 47mm Outside Diameter - 36X47X7 HMSA10 RG
This radial shaft seal provides a rotary sealing function for shafts, preventing fluid escape and contamination in rotating equipment. It is crafted from nitrile rubber and intended for use where a rubber sealing lip is required to maintain operational integrity in motors and similar rotating assemblies.
Features and Benefits:
• Nitrile rubber material offers chemical and wear resistance
• Rotary seal design maintains continuous contact during rotation
• 7mm section thickness supports sustained sealing pressure
• Robust lip geometry reduces external contaminant ingress
• Rotary seal design maintains continuous contact during rotation
• 7mm section thickness supports sustained sealing pressure
• Robust lip geometry reduces external contaminant ingress
Applications
• Suitable for sealing motor shafts in electromechanical drives
• Ideal for small gearboxes requiring oil retention
• Used with rotating bearings to prevent lubricant loss
• Can be used for pump shaft sealing in Compact assemblies
• Ideal for small gearboxes requiring oil retention
• Used with rotating bearings to prevent lubricant loss
• Can be used for pump shaft sealing in Compact assemblies
What shaft diameters will it fit?
It fits a shaft bore of 36mm corresponding to the inner sealing surface.
What external housing size is required for installation?
The outer mounting area must accommodate a 47mm outer diameter for correct seating.
How thick is the sealing section that contacts the shaft?
The sealing cross-section measures 7mm in thickness.
Which elastomer compound composes the sealing lip?
The lip material is nitrile rubber, chosen for hydrocarbon resistance.
Is this suitable for replacing worn Seals of matching size?
It can serve as a replacement when 36x47x7 dimensions match the original seal.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 22 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 20 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 17 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 27 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 26 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 30 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 24 mm ID, 47 mm OD, 7 mm