SKF Nitrile Rubber (NBR) Seal, 27 mm ID, 47 mm OD, 7 mm
- RS 제품 번호:
- 266-9098
- 제조사 부품 번호:
- 27X47X7 HMSA10 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩25,022.80
재고있음
- 추가로 2026년 3월 23일 부터 30 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩2,502.28 | ₩25,019.04 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 266-9098
- 제조사 부품 번호:
- 27X47X7 HMSA10 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 7mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 7mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Seal, 27mm Inside Diameter, 47mm Outside Diameter - 27X47X7 HMSA10 RG
This seal provides a rotary shaft sealing solution for interfaces between rotating and stationary components, designed to retain oil or grease and reduce ingress of contaminants in mechanical assemblies. It features a rubber outer diameter and an elastomer sealing lip with an auxiliary non‑contacting lip and spring support to maintain effective shaft contact in polluted environments.
Features & Benefits
• Auxiliary non‑contacting lip improves contamination exclusion
• Garter spring maintains lip radial pressure for consistent sealing
• Accommodates misalignment to reduce installation stress
• High pumping rate assists Rapid lubricant circulation
• Suitable for operation from -40°C to 100°C
• Garter spring maintains lip radial pressure for consistent sealing
• Accommodates misalignment to reduce installation stress
• High pumping rate assists Rapid lubricant circulation
• Suitable for operation from -40°C to 100°C
Applications
• Suitable for bearing housings in automation equipment
• Ideal for gearboxes handling lubricating oil or grease
• Used with rotating shafts in electrical motor assemblies
• Can be used for hydraulic pumps in mechanical systems
• Ideal for gearboxes handling lubricating oil or grease
• Used with rotating shafts in electrical motor assemblies
• Can be used for hydraulic pumps in mechanical systems
What maximum shaft speed can it tolerate?
It is rated for rotational speeds up to 3780 r/min under specified conditions.
How does the seal cope with short temperature spikes?
It withstands brief elevations to 120°C for intermittent operation.
What is the permitted peripheral shaft velocity?
The allowable circumferential speed is 5.34 m/s.
What pressure differential can the sealing lip handle?
The seal is specified for a pressure differential of 0.03 N/mm.
What material composes the primary sealing lip?
The lip is manufactured from nitrile rubber (NBR) to balance oil resistance and elasticity.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 27 mm ID, 47 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 26 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 17 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 32 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 36 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 28 mm ID, 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 22 mm ID, 47 mm OD, 7 mm