SKF Nitrile Rubber (NBR) Radial Shaft Seal, 45 mm ID, 72 mm OD, 8 mm
- RS 제품 번호:
- 267-0260
- 제조사 부품 번호:
- 45X72X8 HMS5 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩51,320.00
재고있음
- 추가로 2026년 10월 12일 부터 20 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩5,132.00 | ₩51,320.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-0260
- 제조사 부품 번호:
- 45X72X8 HMS5 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 45mm | |
| Product Type | Radial Shaft Seal | |
| Outside Diameter | 72mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 8mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 45mm | ||
Product Type Radial Shaft Seal | ||
Outside Diameter 72mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 8mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 45mm Inside Diameter, 72mm Outside Diameter - 45X72X8 HMS5 RG
This radial shaft seal provides a sealing solution for rotating shafts, preventing lubricant leakage and excluding contaminants in rotary assemblies. It is manufactured from nitrile rubber and is intended for use where a resilient elastomer contact seal is required around a moving shaft.
Features and Benefits:
• Nitrile rubber compound resists common oils and greases
• Rotary design maintains continuous contact during shaft movement
• Sealing lip geometry minimises fluid escape under rotation
• Robust 8mm thickness improves longevity under axial load
• Compatible with moderate temperature and chemical exposure
• Rotary design maintains continuous contact during shaft movement
• Sealing lip geometry minimises fluid escape under rotation
• Robust 8mm thickness improves longevity under axial load
• Compatible with moderate temperature and chemical exposure
Applications
• Suitable for bearings in industrial gearboxes
• Used with motor shafts in general machinery
• Ideal for pump shaft sealing duties
• Can be used for transmission component sealing
• Appropriate for rotating assemblies in factory equipment
• Used with motor shafts in general machinery
• Ideal for pump shaft sealing duties
• Can be used for transmission component sealing
• Appropriate for rotating assemblies in factory equipment
What internal dimension should the shaft diameter match?
The seal is specified for a 45mm inside diameter and should fit shafts sized accordingly.
What external housing bore is required for correct installation?
The outer diameter is 72mm so the receiving bore must accommodate that outside dimension for proper seating.
How thick is the sealing element and what does that imply?
The body thickness is 8mm which provides a substantial cross-section for pressure resistance and handling installation stresses.
Which material is used and why is it chosen for rotary seals?
The material is nitrile rubber, selected for its compatibility with oils and common lubricants.
Is this product suited to dynamic rotary sealing applications?
Yes, the component is a rotary shaft seal designed to operate while the shaft is turning.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 45 mm ID, 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 58 mm ID, 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 56 mm ID, 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 60 mm ID, 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 42 mm ID, 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 50 mm ID, 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 52 mm ID, 72 mm OD, 8 mm