제조사부품번호

Infineon 8 V 130 mA Rectifier & Schottky Diode Schottky 3-Pin SOT-23 BAT68E6327HTSA1

RS 제품 번호:: 262-6710
제조사 부품 번호:: BAT68E6327HTSA1
제조업체:: Infineon

Infineon 8 V 130 mA Rectifier & Schottky Diode Schottky 3-Pin SOT-23 BAT68E6327HTSA1

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 reel of 3000 units)*

₩498,000.00

추가로 2026년 11월 02일 부터 6,000 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	릴당*
3000 +	₩166.00	₩496,200.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 262-6710
제조사 부품 번호:: BAT68E6327HTSA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Mount Type	Surface
	Product Type	Rectifier & Schottky Diode
	Package Type	SOT-23
	Maximum Continuous Forward Current If	130mA
	Peak Reverse Repetitive Voltage Vrrm	8V
	Series	BAT68
	Rectifier Type	Schottky
	Pin Count	3
	Minimum Operating Temperature	-65°C
	Peak Non-Repetitive Forward Surge Current Ifsm	600mA
	Peak Reverse Current Ir	1.2μA
	Maximum Forward Voltage Vf	800mV
	Maximum Operating Temperature	150°C
	Width	1mm
	Standards/Approvals	RoHS
	Length	2.9mm
	Height	2.4mm
	Automotive Standard	AEC-Q101

	모두 선택
	브랜드 Infineon
	Mount Type Surface
	Product Type Rectifier & Schottky Diode
	Package Type SOT-23
	Maximum Continuous Forward Current If 130mA
	Peak Reverse Repetitive Voltage Vrrm 8V
	Series BAT68
	Rectifier Type Schottky
	Pin Count 3
	Minimum Operating Temperature -65°C
	Peak Non-Repetitive Forward Surge Current Ifsm 600mA
	Peak Reverse Current Ir 1.2μA
	Maximum Forward Voltage Vf 800mV
	Maximum Operating Temperature 150°C
	Width 1mm
	Standards/Approvals RoHS
	Length 2.9mm
	Height 2.4mm
	Automotive Standard AEC-Q101

Datasheet - BAT68E6327HTSA1

Infineon BAT68 Series Rectifier & Schottky Diode, 8V Peak Reverse Repetitive Voltage, 130mA Continuous Forward Current - BAT68E6327HTSA1

This rectifier & Schottky diode provides low-voltage-drop rectification for surface-mounted circuitry and automotive applications. It operates across a wide temperature range suitable for harsh environments and meets RoHS and AEC‑Q101 requirements for restricted-substance compliance and automotive-grade acceptance. The component is supplied in a Compact SOT-23 package for PCB-level mounting.

Features and Benefits:

• 800mV maximum forward voltage reduces conduction losses
• 130mA continuous forward current supports low-power signal paths
• 600mA surge forward capacity handles transient inrush events
• 1.2μA Peak reverse current minimises leakage at reverse bias
• -65°C to 150°C operating range endures high-temperature cycles

Applications

• Suitable for polarity protection in automotive electronics
• Ideal for low-voltage power-rail rectification on PCBs
• Used with battery-fed sensor modules requiring low drop
• Can be used for clamp and steering diode roles in circuits
• Suitable for compact, surface-mounted consumer devices

What package type should I expect for board layout?

The device arrives in a SOT-23 package with three pins for surface mounting.

How does it behave under brief overcurrent conditions?

It can withstand a non-repetitive forward surge of up to 600mA for transient events.

What thermal extremes can it reliably face?

The component is rated to operate from -65°C up to 150°C.

Which approvals confirm suitability for automotive use?

It carries AEC‑Q101 recognition and conforms to RoHS restrictions.