Pilz PNOZ X1, 24V ac/dc Safety Relay, 3 Safety Contacts, 1

RS 제품 번호:: 239-1033
Distrelec 제품 번호:: 300-77-761
제조사 부품 번호:: 774300
제조업체:: Pilz

Pilz PNOZ X1, 24V ac/dc Safety Relay, 3 Safety Contacts, 1

Subtotal (1 unit)*

₩521,980.00

130 개 단위 배송 준비 완료
추가로 2026년 11월 23일 부터 64 개 단위 배송
추가로 2026년 12월 21일 부터 44 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩521,980.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 239-1033
Distrelec 제품 번호:: 300-77-761
제조사 부품 번호:: 774300
제조업체:: Pilz

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Pilz
	Product Type	Safety Relay
	Safety Contacts	3
	Contact Configuration	3 NO/1 NC
	Number of Auxiliary Contacts	1
	Reset Method	Automatic & Manual
	Mount Type	DIN Rail
	Series	PNOZ X1
	Power Consumption	2.0W
	Terminal Type	Screw
	IP Rating	IP54, IP40, IP20
	Switching AC Voltage	240V ac
	Switching DC Voltage	24V dc
	Contact Current	6A
	Minimum Operating Temperature	-10°C
	Standards/Approvals	EN 60947-1, EN ISO 13849-1, EN IEC 62061, EN 954-1, EN 60068-2-78, IEC 61511, EN 60204-1, EN 60068-2-6, EN 60947-5-1, EN 61000-6-2, IEC 60204-1
	Maximum Operating Temperature	55°C
	Height	121mm
	Width	22.5mm
	Length	87mm
	Hazardous Area Certification	No
	Safety Category	PLe Category 4
	Coil Voltage	24V ac/dc

	모두 선택
	브랜드 Pilz
	Product Type Safety Relay
	Safety Contacts 3
	Contact Configuration 3 NO/1 NC
	Number of Auxiliary Contacts 1
	Reset Method Automatic & Manual
	Mount Type DIN Rail
	Series PNOZ X1
	Power Consumption 2.0W
	Terminal Type Screw
	IP Rating IP54, IP40, IP20
	Switching AC Voltage 240V ac
	Switching DC Voltage 24V dc
	Contact Current 6A
	Minimum Operating Temperature -10°C
	Standards/Approvals EN 60947-1, EN ISO 13849-1, EN IEC 62061, EN 954-1, EN 60068-2-78, IEC 61511, EN 60204-1, EN 60068-2-6, EN 60947-5-1, EN 61000-6-2, IEC 60204-1
	Maximum Operating Temperature 55°C
	Height 121mm
	Width 22.5mm
	Length 87mm
	Hazardous Area Certification No
	Safety Category PLe Category 4
	Coil Voltage 24V ac/dc

COO (Country of Origin):: CN

PILZ PNOZ X1 Safety Relay, Single Channel

The PNOZ X1 series from PILZ is a reliable and affordable safety relay that will give you the confidence to run your safety circuits in a safe manner.

Features and benefits

• Specially designed for two handed control/operation. The P2HZ series will not function unless the operator has their hands outside the danger zone area during hazardous movement.

• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage

• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)

• Suitable for DIN rail mounting

• Durable and has an extended service life vs. competitors

Safety features

• The relay will provide the circuit self-monitoring.

• The safety functions of the device remain in effect even in the case of component failures.

• The correct opening and closing of the safety relays functions are tested automatically at the end of each on/off cycle.

Applications

• Mechanical presses
• Hydraulic presses
• General safety circuits (in accordance with EN 60204-1)
• Emergency stop buttons
• Safety curtains

Technical safety parameters

• EN 60204-1

• EN 954-1

• EN (IEC) 62061

• EN ISO 13849-1

• IEC 61511 – SIL 3

Pilz PNOZ X1, 24V ac/dc Safety Relay, 3 Safety Contacts, 1

PILZ PNOZ X1 Safety Relay, Single Channel

Features and benefits

Safety features

• Mechanical presses• Hydraulic presses• General safety circuits (in accordance with EN 60204-1)• Emergency stop buttons • Safety curtains

관련된 링크들

• Mechanical presses
• Hydraulic presses
• General safety circuits (in accordance with EN 60204-1)
• Emergency stop buttons
• Safety curtains