제조사부품번호

3M 7100260125 Red Vinyl 33 m Hazard Tape 0.14 mm Thickness

RS 제품 번호:: 337-005
제조사 부품 번호:: 7100260125
제조업체:: 3M

3M 7100260125 Red Vinyl 33 m Hazard Tape 0.14 mm Thickness

모든 Safety & Hazard Tapes 열람하기

Subtotal (1 unit)*

₩116,460.00

재고있음

16 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩116,460.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 337-005
제조사 부품 번호:: 7100260125
제조업체:: 3M

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	3M
	Product Type	Hazard Tape
	Tape Type	Adhesive Tape
	Colour	Red
	Backing Material	Vinyl
	Width	50mm
	Length	33m
	Thickness	0.14mm
	Tensile Strength	24.5N/100 mm
	Elongation at Break	130%
	Maximum Operating Temperature	76.66°C
	Minimum Operating Temperature	4.44°C
	Adhesive Material	Rubber
	Standards/Approvals	No

	모두 선택
	브랜드 3M
	Product Type Hazard Tape
	Tape Type Adhesive Tape
	Colour Red
	Backing Material Vinyl
	Width 50mm
	Length 33m
	Thickness 0.14mm
	Tensile Strength 24.5N/100 mm
	Elongation at Break 130%
	Maximum Operating Temperature 76.66°C
	Minimum Operating Temperature 4.44°C
	Adhesive Material Rubber
	Standards/Approvals No

제외

COO (Country of Origin):: US

3M Hazard Tape, 50mm Width, 33m Length - 7100260125

This hazard tape is a red vinyl safety tape designed to mark hazards and restricted areas in industrial settings. It combines a flexible vinyl backing with a rubber adhesive to provide visible delineation for safety and maintenance tasks in automation, electronics, electrical and mechanical environments.

Features and Benefits:

• Rubber-based adhesive offers strong initial tack and adhesion
• Vinyl backing yields 130% elongation for stretchable application
• 24.5N/100mm tensile strength resists tearing under load
• 0.14mm thickness balances flexibility and durability
• Withstands temperatures up to +76°C for high-heat areas
• Available in 50mm width for standardised marking lanes

Applications

• Suitable for marking hazardous machinery zones
• Ideal for floor demarcation in production lines
• Used for temporary isolation during electrical works
• Can be used for cable and conduit identification
• Suitable for maintenance area cordoning in workshops

How long will a single roll typically cover for line marking tasks?

A roll provides 33 m of continuous tape, allowing extended runs of hazard marking without frequent changes.

How does the tape perform when stretched during application?

The backing's 130% elongation permits controlled stretching to conform to irregular surfaces while retaining structural integrity.

Is the adhesive appropriate for use on typical industrial substrates?

The rubber adhesive is formulated to adhere to common surfaces such as metal, plastic and painted concrete encountered in plant environments.

Can this tape withstand brief exposure to elevated temperatures near equipment?

The tape tolerates operating conditions up to +76°C, suitable for areas with intermittent heat but not for continuous exposure above this limit.