IDEM GLS Rope Pull Switch 239 mm, Straight

모든 Rope Pull Switches 열람하기

Subtotal (1 unit)*

₩240,087.28

Add to Basket
수량 선택 또는 입력
재고있음
  • 6 개 단위 배송 준비 완료
  • 추가로 2026년 4월 01일 부터 4 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩240,087.28

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
826-4081
제조사 부품 번호:
142074A
제조업체:
IDEM
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

IDEM

Product Type

Rope Pull Switch

Mounting Orientation

Straight

Indicator Type

LED Green, Flashing Red, LED Steady Green, Steady Red

IP Rating

IP67

Number of Cable Entries

4

Series

GLS

Minimum Operating Temperature

-25°C

Contact DC Voltage

250V dc

Contact Current

6A

Contact AC Voltage

250V ac

Reset Button

Yes

E-Stop Button

Yes

Maximum Operating Temperature

80°C

Depth

54mm

Housing Material

Die Cast Aluminium

Length

239mm

Width

63 mm

Standards/Approvals

No

Hazardous Area Certification

No

Mechanical Life

1500000Operations

Conduit Entry

M20

COO (Country of Origin):
GB

IDEM Guardian Line GLS Standard Safety Rope Pull Switches


The Guardian Line GLS from IDEM are safety rope pull switches with a robust yellow diecast housing that provide a general purpose safety solution and offer a choice of fittings depending on the application. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection.

In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950.

Switch mechanism will latch the instant the safety contacts open, ISO13850 standard

Upto 60m can be covered using only a single switch

Upto 80m can be covered using two switches

Positive break contacts to IEC60947-5-1

Robust yellow diecast housing

IP67 protection

Rugged integral sealing bellows mean they can be high pressure hosed

All internal screws are stainless steel

Easy to wire with 3 x M20 conduit entries

4 pole, either 3NC / 1NO, 2NC / 2NO or 4NC

Note

826-4079 & 826-4088 have an E-stop, 826-4081, 826-4085 & 826-4094 have an E-stop and LED.

Approvals

CE, cULus, TUV.

Standards

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.

관련된 링크들