제조사부품번호

IDEM GLS Rope Pull Switch 239 mm, Straight, 2

RS 제품 번호:: 826-4088
제조사 부품 번호:: 142064
제조업체:: IDEM

IDEM GLS Rope Pull Switch 239 mm, Straight, 2

Subtotal (1 unit)*

₩211,180.40

재고있음

추가로 2026년 3월 04일 부터 11 개 단위 배송
추가로 2026년 4월 01일 부터 6 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩211,180.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 826-4088
제조사 부품 번호:: 142064
제조업체:: IDEM

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	IDEM
	Product Type	Rope Pull Switch
	Indicator Type	LED Green, LED Steady Green, Flashing Red, Steady Red
	Mounting Orientation	Straight
	Contact Configuration	2
	IP Rating	IP67
	Number of Cable Entries	4
	Series	GLS
	Reset Button	Yes
	Contact AC Voltage	250V ac
	Minimum Operating Temperature	-25°C
	Contact Current	3A
	E-Stop Button	Yes
	Contact DC Voltage	250V dc
	Maximum Operating Temperature	80°C
	Standards/Approvals	No
	Length	239mm
	Depth	54mm
	Width	63 mm
	Housing Material	Die Cast Aluminium
	Hazardous Area Certification	No
	Mechanical Life	1500000Operations
	Conduit Entry	M20

	모두 선택
	브랜드 IDEM
	Product Type Rope Pull Switch
	Indicator Type LED Green, LED Steady Green, Flashing Red, Steady Red
	Mounting Orientation Straight
	Contact Configuration 2
	IP Rating IP67
	Number of Cable Entries 4
	Series GLS
	Reset Button Yes
	Contact AC Voltage 250V ac
	Minimum Operating Temperature -25°C
	Contact Current 3A
	E-Stop Button Yes
	Contact DC Voltage 250V dc
	Maximum Operating Temperature 80°C
	Standards/Approvals No
	Length 239mm
	Depth 54mm
	Width 63 mm
	Housing Material Die Cast Aluminium
	Hazardous Area Certification No
	Mechanical Life 1500000Operations
	Conduit Entry M20

COO (Country of Origin):: GB

IDEM Guardian Line GLS Standard Safety Rope Pull Switches

The Guardian Line GLS from IDEM are safety rope pull switches with a robust yellow diecast housing that provide a general purpose safety solution and offer a choice of fittings depending on the application. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection.

In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950.

Switch mechanism will latch the instant the safety contacts open, ISO13850 standard

Upto 60m can be covered using only a single switch

Upto 80m can be covered using two switches

Positive break contacts to IEC60947-5-1

Robust yellow diecast housing

IP67 protection

Rugged integral sealing bellows mean they can be high pressure hosed

All internal screws are stainless steel

Easy to wire with 3 x M20 conduit entries

4 pole, either 3NC / 1NO, 2NC / 2NO or 4NC

Note

826-4079 & 826-4088 have an E-stop, 826-4081, 826-4085 & 826-4094 have an E-stop and LED.

Approvals

CE, cULus, TUV.

Standards

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.

IDEM GLS Rope Pull Switch 239 mm, Straight, 2

IDEM Guardian Line GLS Standard Safety Rope Pull Switches

Note

Approvals

Standards

관련된 링크들