ZANDER AACHEN ZLMS Grab Wire Switch 50 mm, Screw, 1 NO, 3 NC
- RS 제품 번호:
- 475-683
- 제조사 부품 번호:
- 940050
- 제조업체:
- ZANDER AACHEN
Subtotal (1 unit)*
₩1,167,060.00
제조사가 재고 비축중
- 2026년 8월 31일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩1,167,060.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 475-683
- 제조사 부품 번호:
- 940050
- 제조업체:
- ZANDER AACHEN
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | ZANDER AACHEN | |
| Product Type | Grab Wire Switch | |
| Contact Configuration | 1 NO, 3 NC | |
| Mounting Orientation | Screw | |
| Indicator Type | LED | |
| IP Rating | IP69K, IP67 | |
| Number of Cable Entries | 3 | |
| Series | ZLMS | |
| Contact AC Voltage | 240V ac | |
| Contact Current | 3A | |
| Contact DC Voltage | 24V dc | |
| Minimum Operating Temperature | -25°C | |
| Reset Button | Yes | |
| E-Stop Button | Yes | |
| Maximum Operating Temperature | 80°C | |
| Standards/Approvals | ISO 13850, IEC 60947-5-5, CE, TÜV, IEC 60947-5-1, EN 60204-1, EN 60947-5-1, EN 60947-5-5 | |
| Width | 74mm | |
| Depth | 57mm | |
| Length | 50mm | |
| Housing Material | Stainless Steel | |
| Hazardous Area Certification | No | |
| Conduit Entry | 3 x M20 | |
| Mechanical Life | 1.5Operations | |
| 모두 선택 | ||
|---|---|---|
브랜드 ZANDER AACHEN | ||
Product Type Grab Wire Switch | ||
Contact Configuration 1 NO, 3 NC | ||
Mounting Orientation Screw | ||
Indicator Type LED | ||
IP Rating IP69K, IP67 | ||
Number of Cable Entries 3 | ||
Series ZLMS | ||
Contact AC Voltage 240V ac | ||
Contact Current 3A | ||
Contact DC Voltage 24V dc | ||
Minimum Operating Temperature -25°C | ||
Reset Button Yes | ||
E-Stop Button Yes | ||
Maximum Operating Temperature 80°C | ||
Standards/Approvals ISO 13850, IEC 60947-5-5, CE, TÜV, IEC 60947-5-1, EN 60204-1, EN 60947-5-1, EN 60947-5-5 | ||
Width 74mm | ||
Depth 57mm | ||
Length 50mm | ||
Housing Material Stainless Steel | ||
Hazardous Area Certification No | ||
Conduit Entry 3 x M20 | ||
Mechanical Life 1.5Operations | ||
- COO (Country of Origin):
- DE
The H.ZANDER Safety rope switches are designed to be mounted on machines and sections of conveyors, which cannot be protected by guards. Safety rope switches can initiate the emergency command from any point along the installed rope length. A red LED, which is visible from far off, indicates the switching status. The safety rope switch is also available with stainless steel housing.
Switches off by breakage or tension loss
Protect hazards up to 50 m
Rope tension indicator
Stainless steel housing IP69K
관련된 링크들
- ZANDER AACHEN ZLSE Rope Pull Switch 239 mm, Screw, 3 NC/1 NO
- Telemecanique Sensors XY2CH Grab Wire Switch 19.5 cm, Screw, 1 NO/1 NC
- ABB LineStrong3DZ Grab Wire Switch 250 m, 4 NO/4 NC
- ABB LineStrong3D Grab Wire Switch 250 m, 4 NO/4 NC
- Telemecanique Sensors XY2CE Grab Wire Switch, 1 NO/1 NC
- ZANDER AACHEN Bridge Rectifier, 250 V
- ZANDER AACHEN MINOS SL Safety Relay
- ZANDER AACHEN MINOS SL Series DIN Rail Timer Relay, 2-Contact, 24 V dc, NC Switch Configuration
