SKF 32311 J2 Taper 55 mm ID Roller Bearing, 120 mm OD
- RS Stock No.:
- 208-0184
- Mfr. Part No.:
- 32311 J2
- Brand:
- SKF
Subtotal (1 unit)*
₩156,792.00
일시적 품절
- 2026년 3월 09일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Units | Per unit |
|---|---|
| 1 + | ₩156,792.00 |
*price indicative
- RS Stock No.:
- 208-0184
- Mfr. Part No.:
- 32311 J2
- Brand:
- SKF
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55 mm | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 245 KN | |
| End Type | Shielded | |
| Outside Diameter | 120 mm | |
| Series | 32311 | |
| Static Load Rating | 250kN | |
| Cup Width | 35mm | |
| Number of Rows | 1 | |
| Cone Width | 45.5mm | |
| Limiting Speed | 5600rpm | |
| Bearing Type | Taper | |
| Select all | ||
|---|---|---|
브랜드 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 55 mm | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 245 KN | ||
End Type Shielded | ||
Outside Diameter 120 mm | ||
Series 32311 | ||
Static Load Rating 250kN | ||
Cup Width 35mm | ||
Number of Rows 1 | ||
Cone Width 45.5mm | ||
Limiting Speed 5600rpm | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Related links
- NTN 32311U Single Row Tapered Roller 55 mm ID Taper Roller Bearing, 120 mm OD
- SKF 31311 J2/Q Taper 55 mm ID Roller Bearing, 120 mm OD
- SNR 32311A Single Row Tapered Roller 55 mm ID Roller Bearing, 120 mm OD
- SKF 30311 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32211 J2/Q Taper 55 mm ID Roller Bearing, 100 mm OD
- SKF 22311 E/VA405 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32224/DF Taper Roller 120 mm ID Taper Roller Bearing, 215 mm OD
- NTN 4T-30311 Taper Roller 55 mm ID Taper Roller Bearing, 120 mm OD