Subtotal (1 unit)*
₩122,931.32
일시적 품절
- 2026년 4월 06일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩122,931.32 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 207-9997
- 제조사 부품 번호:
- 30311
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55 mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Limiting Speed | 5600rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 159 KN | |
| End Type | Shielded | |
| Static Load Rating | 167kN | |
| Cup Width | 25mm | |
| Number of Rows | 1 | |
| Cone Width | 31.5mm | |
| Bearing Material | Steel | |
| Outside Diameter | 120 mm | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 55 mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Limiting Speed 5600rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 159 KN | ||
End Type Shielded | ||
Static Load Rating 167kN | ||
Cup Width 25mm | ||
Number of Rows 1 | ||
Cone Width 31.5mm | ||
Bearing Material Steel | ||
Outside Diameter 120 mm | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
관련된 링크들
- NTN 4T-30311 Taper Roller 55 mm ID Taper Roller Bearing, 120 mm OD
- NTN 4T-30311D Taper Roller 55 mm ID Taper Roller Bearing, 120 mm OD
- RS PRO 30311 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32311 J2 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 22311 E/VA405 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 31311 J2/Q Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32224/DF Taper Roller 120 mm ID Taper Roller Bearing, 215 mm OD
- SKF 580/572/Q Taper Roller 82.55 mm ID Taper Roller Bearing, 139.9 mm OD