Subtotal (1 unit)*
₩37,600.00
재고있음
- 6 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩37,600.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 208-0055
- 제조사 부품 번호:
- 32303
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 17 mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Outside Diameter | 47 mm | |
| Cup Width | 16mm | |
| Number of Rows | 1 | |
| Cone Width | 20.25mm | |
| Bearing Material | Steel | |
| Limiting Speed | 16000rpm | |
| Static Load Rating | 34.3kN | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 35.4 KN | |
| End Type | Shielded | |
| Bearing Type | Taper | |
| Race Type | Tapered | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 17 mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Outside Diameter 47 mm | ||
Cup Width 16mm | ||
Number of Rows 1 | ||
Cone Width 20.25mm | ||
Bearing Material Steel | ||
Limiting Speed 16000rpm | ||
Static Load Rating 34.3kN | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 35.4 KN | ||
End Type Shielded | ||
Bearing Type Taper | ||
Race Type Tapered | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
관련된 링크들
- FAG 32303-A Taper 17 mm ID Roller Bearing, 47 mm OD
- RS PRO 32303 Taper 17 mm ID Roller Bearing, 47 mm OD
- SKF 30303 Single Row Tapered Roller 17 mm ID Taper Roller Bearing, 47 mm OD
- NTN 4T-30303 Taper Roller 17 mm ID Taper Roller Bearing, 47 mm OD
- SNR 30303A Taper Roller 17 mm ID Tapered Roller Bearing, 47 mm OD
- SKF 30203 Taper 17 mm ID Roller Bearing, 40 mm OD
- FAG 30303-A Taper 17 mm ID Roller Bearing, 47 mm OD
- SKF 32005X/Q Taper 25 mm ID Roller Bearing, 47 mm OD