Subtotal (1 unit)*
₩49,011.60
일시적 품절
- 2026년 6월 17일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩49,011.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 190-8380
- 제조사 부품 번호:
- 32303-A
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 17 mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| Bearing Dynamic Load Rating | 36.5 KN | |
| Outside Diameter | 47 mm | |
| Standards/Approvals | No | |
| Static Load Rating | 36kN | |
| Cone Width | 20.25mm | |
| End Type | Open | |
| Bearing Type | Taper | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 17 mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
Bearing Dynamic Load Rating 36.5 KN | ||
Outside Diameter 47 mm | ||
Standards/Approvals No | ||
Static Load Rating 36kN | ||
Cone Width 20.25mm | ||
End Type Open | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
관련된 링크들
- SKF 32303 Taper 17 mm ID Roller Bearing, 47 mm OD
- RS PRO 32303 Taper 17 mm ID Roller Bearing, 47 mm OD
- FAG 30303-A Taper 17 mm ID Roller Bearing, 47 mm OD
- NTN 4T-30303 Taper Roller 17 mm ID Taper Roller Bearing, 47 mm OD
- FAG 30203-A Taper 17 mm ID Roller Bearing, 40 mm OD
- FAG 30204-A Taper 20 mm ID Tapered Roller Bearing, 47 mm OD
- FAG 32005-X-XL Taper 25 mm ID Roller Bearing, 47 mm OD
- SNR 30303A Taper Roller 17 mm ID Tapered Roller Bearing, 47 mm OD