The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.

Low friction

Enhanced operational reliability

Rigid bearing application

A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.

Running-in period with reduced temperature peaks

Separable and interchangeable

The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.

모두 선택	제품 정보	값
	브랜드	SKF
	Product Type	Roller Bearing
	Inside Diameter	65 mm
	Bore Type	Parallel
	Static Load Rating	228kN
	Number of Rows	1
	Cone Width	36mm
	Outside Diameter	140 mm
	Cup Width	28mm
	Limiting Speed	4800rpm
	Standards/Approvals	No
	Bearing Dynamic Load Rating	240 KN
	End Type	Shielded
	Bearing Type	Taper

	모두 선택
	브랜드 SKF
	Product Type Roller Bearing
	Inside Diameter 65 mm
	Bore Type Parallel
	Static Load Rating 228kN
	Number of Rows 1
	Cone Width 36mm
	Outside Diameter 140 mm
	Cup Width 28mm
	Limiting Speed 4800rpm
	Standards/Approvals No
	Bearing Dynamic Load Rating 240 KN
	End Type Shielded
	Bearing Type Taper

SKF 30313 Taper 65 mm ID Roller Bearing, 140 mm OD

관련된 링크들