Subtotal (1 unit)*
₩339,612.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 + | ₩339,612.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 208-0186
- 제조사 부품 번호:
- 33216
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 80mm | |
| Bore Type | Parallel | |
| Limiting Speed | 4500rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 308kN | |
| End Type | Shielded | |
| Outside Diameter | 140mm | |
| Cone Width | 46mm | |
| Number of Rows | 1 | |
| Cup Width | 35mm | |
| Static Load Rating | 375kN | |
| Bearing Type | Taper | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 80mm | ||
Bore Type Parallel | ||
Limiting Speed 4500rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 308kN | ||
End Type Shielded | ||
Outside Diameter 140mm | ||
Cone Width 46mm | ||
Number of Rows 1 | ||
Cup Width 35mm | ||
Static Load Rating 375kN | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
관련된 링크들
- NTN 33216U Taper Roller 80 mm ID Roller Bearing, 140 mm OD
- FAG 33216 Taper Roller 80 mm ID Tapered Roller Bearing, 140 mm OD
- SKF 32216 Taper 80 mm ID Roller Bearing, 140 mm OD
- SKF C 2216 K Taper 80 mm ID Roller Bearing, 140 mm OD
- SKF C 2216/C3 Taper 80 mm ID Roller Bearing, 140 mm OD
- SKF T4CB 140 Taper 140 mm ID Roller Bearing, 195 mm OD
- SKF 30313 Taper 65 mm ID Roller Bearing, 140 mm OD
- SKF 30228 Taper 140 mm ID Roller Bearing, 250 mm OD