Timken 30309 Taper 45 mm ID Metric Roller Bearing, 100 mm OD
- RS 제품 번호:
- 193-1005
- 제조사 부품 번호:
- 30309
- 제조업체:
- Timken
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩82,387.50
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩82,387.50 |
| 13 - 24 | ₩79,092.00 |
| 25 + | ₩77,434.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 193-1005
- 제조사 부품 번호:
- 30309
- 제조업체:
- Timken
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 45mm | |
| Bore Type | Tapered | |
| Static Load Rating | 139kN | |
| Limiting Speed | 7000rpm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 129kN | |
| Standards/Approvals | No | |
| Cup Width | 22mm | |
| Number of Rows | 1 | |
| Cone Width | 27.25mm | |
| Outside Diameter | 100mm | |
| Bearing Type | Taper | |
| 모두 선택 | ||
|---|---|---|
브랜드 Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 45mm | ||
Bore Type Tapered | ||
Static Load Rating 139kN | ||
Limiting Speed 7000rpm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 129kN | ||
Standards/Approvals No | ||
Cup Width 22mm | ||
Number of Rows 1 | ||
Cone Width 27.25mm | ||
Outside Diameter 100mm | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- PL
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
관련된 링크들
- Timken 32209 Taper 45 mm ID Metric Roller Bearing, 85 mm OD
- Timken 32009X Taper 45 mm ID Metric Roller Bearing, 75 mm OD
- FAG 30309-A Taper 45 mm ID Roller Bearing, 100 mm OD
- NTN 4T-30309 Taper Roller 45 mm ID Roller Bearing, 100 mm OD
- Timken 30304 Taper 20 mm ID Metric Roller Bearing, 52 mm OD
- Timken 30305 Taper 25 mm ID Metric Roller Bearing, 62 mm OD
- Timken 33211 Taper 55 mm ID Metric Roller Bearing, 100 mm OD
- Timken 32212 Taper 60 mm ID Metric Roller Bearing, 110 mm OD