Timken 30208 Taper 40 mm ID Metric Roller Bearing, 80 mm OD
- RS 제품 번호:
- 193-0993
- 제조사 부품 번호:
- 30208
- 제조업체:
- Timken
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩45,044.80
재고있음
- 22 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩45,044.80 |
| 13 - 24 | ₩43,240.00 |
| 25 + | ₩42,337.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 193-0993
- 제조사 부품 번호:
- 30208
- 제조업체:
- Timken
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 40 mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Cone Width | 19.75mm | |
| Number of Rows | 1 | |
| Cup Width | 16mm | |
| Bearing Material | Steel | |
| Static Load Rating | 74.7kN | |
| Outside Diameter | 80 mm | |
| End Type | Open | |
| Bearing Dynamic Load Rating | 70.9 kN | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| 모두 선택 | ||
|---|---|---|
브랜드 Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 40 mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Cone Width 19.75mm | ||
Number of Rows 1 | ||
Cup Width 16mm | ||
Bearing Material Steel | ||
Static Load Rating 74.7kN | ||
Outside Diameter 80 mm | ||
End Type Open | ||
Bearing Dynamic Load Rating 70.9 kN | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- PL
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
관련된 링크들
- RS PRO 30208 Taper 40 mm ID Metric Roller Bearing, 80 mm OD
- Timken 32208 Taper 40 mm ID Metric Roller Bearing, 80 mm OD
- Timken 30307 Taper 35 mm ID Metric Roller Bearing, 80 mm OD
- Timken 32216 Taper 80 mm ID Metric Roller Bearing, 140 mm OD
- NSK 30208J Taper 40 mm ID Taper Roller Bearing, 80 mm OD
- NTN 4T-30208 Taper Roller 40 mm ID Taper Roller Bearing, 80 mm OD
- SKF 30208 Taper 40 mm ID Roller Bearing, 80 mm OD
- Timken 32010X Taper 50 mm ID Metric Roller Bearing, 80 mm OD