INA HK1416-2RS-L271 14 mm ID Roller Bearing Drawn Cup Needle, 20 mm OD
- RS 제품 번호:
- 137-1736
- 제조사 부품 번호:
- HK1416-2RS-L271
- 제조업체:
- INA
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩15,853.50
재고있음
- 16 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩15,853.50 |
| 13 - 24 | ₩15,210.00 |
| 25 + | ₩14,917.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 137-1736
- 제조사 부품 번호:
- HK1416-2RS-L271
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 14mm | |
| Race Width | 16mm | |
| Bore Type | Parallel | |
| Cage Material | Sheet Steel | |
| Dynamic Load Rating | 7100N | |
| Static Load Rating | 8500N | |
| End Type | Sealed | |
| Outside Diameter | 20mm | |
| Number of Rows | 1 | |
| Maximum Speed - Grease | 10500rpm | |
| Limiting Speed | 10500rpm | |
| Series | HK | |
| Standards/Approvals | No | |
| Bearing Type | Drawn Cup Needle | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Product Type Roller Bearing | ||
Inside Diameter 14mm | ||
Race Width 16mm | ||
Bore Type Parallel | ||
Cage Material Sheet Steel | ||
Dynamic Load Rating 7100N | ||
Static Load Rating 8500N | ||
End Type Sealed | ||
Outside Diameter 20mm | ||
Number of Rows 1 | ||
Maximum Speed - Grease 10500rpm | ||
Limiting Speed 10500rpm | ||
Series HK | ||
Standards/Approvals No | ||
Bearing Type Drawn Cup Needle | ||
- COO (Country of Origin):
- DE
Schaeffler Series HK Roller Bearing, 14mm Inside Diameter, 20mm Outside Diameter - HK1416-2RS-L271
This roller bearing is a sealed, single-row cylindrical roller unit designed for rotational support in industrial machinery. It is intended for installations where a parallel bore configuration and contained lubricant are required, offering consistent operation in automated and electrical assemblies.
Features & Benefits
• Sealed construction reduces contamination ingress and maintenance
• Sheet steel cage lowers mass while sustaining roller guidance
• Dynamic capacity of 7100 N supports sustained operational loads
• Static capacity of 8500 N withstands high standstill forces
• Limiting speed 10500 r/min enables high-speed rotation with grease
• Parallel bore design simplifies shaft mounting and axial alignment
• Sheet steel cage lowers mass while sustaining roller guidance
• Dynamic capacity of 7100 N supports sustained operational loads
• Static capacity of 8500 N withstands high standstill forces
• Limiting speed 10500 r/min enables high-speed rotation with grease
• Parallel bore design simplifies shaft mounting and axial alignment
**Applications**
• Suitable for spindle support in automation equipment
• Ideal for bearings in electric motor assemblies
• Used with linear actuators in control systems
• Can be used for conveyor rollers in production lines
• Used for rotary components in electronic test rigs
• Ideal for bearings in electric motor assemblies
• Used with linear actuators in control systems
• Can be used for conveyor rollers in production lines
• Used for rotary components in electronic test rigs
What lubrication arrangements suit this bearing?
It is compatible with grease lubrication and supports operation up to the specified limiting speed when greased.
How does the sealing affect maintenance intervals?
The sealed end type minimises ingress of solids and moisture, thereby extending relubrication intervals compared with open designs.
What shaft Interface should be prepared for installation?
A parallel bore shaft with accurate diameter and low runout is required to achieve intended load distribution and life.
How does the cage material influence thermal performance?
The sheet steel cage offers good heat transfer from rollers, aiding thermal stability during sustained high-speed operation.
Can it tolerate static overloading during assembly?
Its static rating provides a margin for assembly loads and brief standstill loads without permanent deformation.
관련된 링크들
- INA HK1514-RS-L271 15 mm ID Roller Bearing Drawn Cup Needle, 21 mm OD
- INA HK2518-RS-L271 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK1214-RS-L271 12 mm ID Roller Bearing Drawn Cup Needle, 18 mm OD
- INA HK1414-RS-L271 14 mm ID Roller Bearing Drawn Cup Needle, 20 mm OD
- INA HK1614-RS-L271 16 mm ID Roller Bearing Drawn Cup Needle, 22 mm OD
- INA HK2218-RS-L271 22 mm ID Roller Bearing Drawn Cup Needle, 28 mm OD
- INA HK2018-RS-L271 20 mm ID Roller Bearing Drawn Cup Needle, 26 mm OD
- INA HK1814-RS-L271 18 mm ID Roller Bearing Drawn Cup Needle, 24 mm OD