제조사부품번호

INA HK2218-RS-L271 22 mm ID Roller Bearing Drawn Cup Needle, 28 mm OD

RS 제품 번호:: 137-1759
제조사 부품 번호:: HK2218-RS-L271
제조업체:: INA

INA HK2218-RS-L271 22 mm ID Roller Bearing Drawn Cup Needle, 28 mm OD

모든 Roller Bearings 열람하기

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩21,180.00

일시적 품절

2026년 11월 30일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 12	₩21,180.00
13 - 24	₩20,360.00
25 +	₩19,920.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 137-1759
제조사 부품 번호:: HK2218-RS-L271
제조업체:: INA

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	INA
	Product Type	Roller Bearing
	Inside Diameter	22mm
	Race Width	18mm
	Bore Type	Parallel
	Cage Material	Sheet Steel
	End Type	Sealed
	Standards/Approvals	No
	Outside Diameter	28mm
	Number of Rows	1
	Dynamic Load Rating	13400N
	Static Load Rating	22100N
	Maximum Speed - Grease	7000rpm
	Limiting Speed	7000rpm
	Bearing Type	Drawn Cup Needle

	모두 선택
	브랜드 INA
	Product Type Roller Bearing
	Inside Diameter 22mm
	Race Width 18mm
	Bore Type Parallel
	Cage Material Sheet Steel
	End Type Sealed
	Standards/Approvals No
	Outside Diameter 28mm
	Number of Rows 1
	Dynamic Load Rating 13400N
	Static Load Rating 22100N
	Maximum Speed - Grease 7000rpm
	Limiting Speed 7000rpm
	Bearing Type Drawn Cup Needle

Datasheet

COO (Country of Origin):: DE

Schaeffler Roller Bearing, 22mm Bore, 28mm Outside Diameter - HK2218-RS-L271

This roller bearing is a drawn cup needle design intended to support Compact shaft assemblies where axial space is limited. It functions as a sealed unit to retain lubricant and exclude contaminants while operating at elevated rotational rates up to the specified limiting speed. The parallel bore form allows straightforward installation on shafts with a matching diameter.

Features and Benefits:

• Sealed end construction prevents ingress of debris
• High limiting speed supports fast rotational applications
• Significant static capacity resists Peak standing loads
• Notable dynamic rating sustains continuous radial loading
• Parallel bore enables straightforward shaft alignment

Applications

• Suitable for Compact gearbox radial support
• Ideal for high-speed textile machine components
• Used with motor armatures in confined spaces
• Can be used for linkage pivot points requiring sealing

What is the specified maximum rotational speed for operation?

The bearing is rated to operate up to a limiting speed of 7000r/min.

How does the sealing affect maintenance intervals?

The sealed configuration retains grease and reduces contamination ingress, thereby extending re-lubrication intervals compared with open designs.

What load capacities are provided for design calculations?

Use a static load capacity of 22,100N and a dynamic load capacity of 13,400N for bearing selection.

Which shaft and housing interfacing details are required for fit?

A parallel bore acceptance requires a 22mm shaft journal and a housing prepared for a drawn cup assembly.

Is this bearing suitable for grease lubrication at high speeds?

It is compatible with grease lubrication and is rated for operation at the stated 7000r/min limiting speed.