제조사부품번호

SMC M4 x 0.7 Female Steel Piston Rod Ball Joint, 5mm Bore Metric

RS 제품 번호:: 263-9155
Distrelec 제품 번호:: 154-23-097
제조사 부품 번호:: KJ4D
제조업체:: SMC

SMC M4 x 0.7 Female Steel Piston Rod Ball Joint, 5mm Bore Metric

모든 Rod Ends 열람하기

Subtotal (1 unit)*

₩24,020.00

일시적 품절

2026년 9월 18일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩24,020.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 263-9155
Distrelec 제품 번호:: 154-23-097
제조사 부품 번호:: KJ4D
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Product Type	Piston Rod Ball Joint
	Connection Size	M4 x 0.7 Female
	Bore Diameter	5mm
	Material	Steel
	Thread Standard	Metric
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	80°C
	Outside Diameter	18mm
	Standards/Approvals	No
	Overall Width	11mm

	모두 선택
	브랜드 SMC
	Product Type Piston Rod Ball Joint
	Connection Size M4 x 0.7 Female
	Bore Diameter 5mm
	Material Steel
	Thread Standard Metric
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 80°C
	Outside Diameter 18mm
	Standards/Approvals No
	Overall Width 11mm

로그인하여 CAD 모델 다운로드

제외

COO (Country of Origin):: FR

SMC Piston Rod Ball Joint, M4x0.7 Connection Size, 5mm Bore Size - KJ4D

This piston rod ball joint is a compact linkage component designed for pneumatic cylinder rod-ends, providing articulated connection where alignment changes occur. Manufactured from steel, it accommodates metric threads and is suited to small-bore rod assemblies operating across a broad temperature range in industrial pneumatic systems.

Features and Benefits:

• M4x0.7 female connection allows secure metric fittings
• 5mm bore compatibility for small-bore rod applications
• Steel construction resists mechanical load in service
• Outside diameter 18mm gives compact radial form factor
• Overall width 11mm supports tight installation envelopes
• Operates between -20°C and 80°C for varied environments

Applications

• Used with pneumatic cylinders on compact automation rigs
• Suitable for small-bore push‑pull rod assemblies
• Ideal for linkage joints in material‑handling devices
• Can be used for alignment correction on actuator rods
• Applied where metric thread rod‑end replacements required

Which thread type does it accept and how does that affect fitment?

It accepts a metric female thread of M4x0.7, ensuring compatibility with standard metric piston rods and simplifying direct screw‑in installation without adaptors.

What limits should be considered for temperature‑sensitive installations?

The component is specified for continuous operation from -20°C up to 80°C, so select it where ambient and fluid temperatures remain within that band.

How does material choice influence mechanical behaviour?

Being made from steel provides predictable stiffness and wear characteristics suitable for repeated articulating loads in pneumatic rod‑end applications.

Is it appropriate for very small bore cylinders?

Yes

its 5mm bore compatibility and compact 11mm width make it suitable for assemblies using small bore piston rods where space is constrained.