TE Connectivity, DuraSeal Insulated Ring Terminal, M6 Stud Size 22 AWG 18 AWG Wire Size, Red
- RS 제품 번호:
- 163-8752
- 제조사 부품 번호:
- B-106-1601
- 제조업체:
- TE Connectivity
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
현재 비가용
죄송합니다. 언제 재입고될지 모릅니다.
- RS 제품 번호:
- 163-8752
- 제조사 부품 번호:
- B-106-1601
- 제조업체:
- TE Connectivity
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | TE Connectivity | |
| Product Type | Ring Terminal | |
| Series | DuraSeal | |
| Insulation | Insulated | |
| Insulation Material | Nylon | |
| Outer Ring Diameter | 10mm | |
| Inner Ring Diameter | 6.5mm | |
| Minimum Wire Size AWG | 22AWG | |
| Maximum Wire Size AWG | 18AWG | |
| Overall Length | 36.07mm | |
| Stud Size | M6 | |
| Colour | Red | |
| Contact Plating | Tin | |
| Contact Material | Copper | |
| Standards/Approvals | No | |
| Maximum Wire Size mm² | 1mm² | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -55°C | |
| Minimum Wire Size mm² | 0.5mm² | |
| 모두 선택 | ||
|---|---|---|
브랜드 TE Connectivity | ||
Product Type Ring Terminal | ||
Series DuraSeal | ||
Insulation Insulated | ||
Insulation Material Nylon | ||
Outer Ring Diameter 10mm | ||
Inner Ring Diameter 6.5mm | ||
Minimum Wire Size AWG 22AWG | ||
Maximum Wire Size AWG 18AWG | ||
Overall Length 36.07mm | ||
Stud Size M6 | ||
Colour Red | ||
Contact Plating Tin | ||
Contact Material Copper | ||
Standards/Approvals No | ||
Maximum Wire Size mm² 1mm² | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -55°C | ||
Minimum Wire Size mm² 0.5mm² | ||
제외
- COO (Country of Origin):
- MX
Waterproof Duraseal terminals
Crimp terminals pre-installed in a heat shrinkable sleeve coated with a hot melt adhesive to make them waterproof.
The connection, insulation and waterproofing are carried out through shrinking after crimping.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed
관련된 링크들
- TE Connectivity, DuraSeal Insulated Ring Terminal, M6 Stud Size 22 AWG 18 AWG Wire Size, Red
- TE Connectivity, DuraSeal Insulated Ring Terminal, M4 Stud Size 22 AWG 18 AWG Wire Size, Red
- TE Connectivity, DuraSeal Insulated Ring Terminal, M10 Stud Size 22 AWG 18 AWG Wire Size, Red
- TE Connectivity, DuraSeal Insulated Ring Terminal, M5 Stud Size 22 AWG 18 AWG Wire Size, Red
- TE Connectivity, DuraSeal Insulated Ring Terminal, M4 Stud Size 16 AWG 14 AWG Wire Size, Blue
- Chemelex, KRT Insulated Ring Terminal, M6 Stud Size 22 AWG 10 AWG Wire Size, Red
- TE Connectivity, DuraSeal Insulated Ring Terminal, 6 mm Stud Size 22 AWG 18 AWG Wire Size, Red
- TE Connectivity, DuraSeal Insulated Ring Terminal, 4 mm Stud Size 22 AWG 18 AWG Wire Size, Red