TE Connectivity, DuraSeal Insulated Ring Terminal, M4 Stud Size 22 AWG 18 AWG Wire Size, Red
- RS 제품 번호:
- 163-8749
- 제조사 부품 번호:
- B-106-1401
- 제조업체:
- TE Connectivity
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 Box of 1000 units)*
₩2,010,227.60
일시적 품절
- 2026년 3월 02일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Box(es) | Per Box | 한팩당* |
|---|---|---|
| 1 - 1 | ₩2,010,227.60 | ₩2,009.72 |
| 2 - 3 | ₩1,959,956.40 | ₩1,958.96 |
| 4 + | ₩1,929,820.00 | ₩1,928.88 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 163-8749
- 제조사 부품 번호:
- B-106-1401
- 제조업체:
- TE Connectivity
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | TE Connectivity | |
| Product Type | Ring Terminal | |
| Series | DuraSeal | |
| Insulation | Insulated | |
| Insulation Material | Nylon | |
| Outer Ring Diameter | 8mm | |
| Inner Ring Diameter | 4.3mm | |
| Maximum Wire Size AWG | 18 AWG | |
| Minimum Wire Size AWG | 22 AWG | |
| Overall Length | 32mm | |
| Stud Size | M4 | |
| Colour | Red | |
| Contact Material | Copper | |
| Contact Plating | Tin | |
| Standards/Approvals | No | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -55°C | |
| 모두 선택 | ||
|---|---|---|
브랜드 TE Connectivity | ||
Product Type Ring Terminal | ||
Series DuraSeal | ||
Insulation Insulated | ||
Insulation Material Nylon | ||
Outer Ring Diameter 8mm | ||
Inner Ring Diameter 4.3mm | ||
Maximum Wire Size AWG 18 AWG | ||
Minimum Wire Size AWG 22 AWG | ||
Overall Length 32mm | ||
Stud Size M4 | ||
Colour Red | ||
Contact Material Copper | ||
Contact Plating Tin | ||
Standards/Approvals No | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -55°C | ||
제외
- COO (Country of Origin):
- MX
Waterproof Duraseal terminals
Crimp terminals pre-installed in a heat shrinkable sleeve coated with a hot melt adhesive to make them waterproof.
The connection, insulation and waterproofing are carried out through shrinking after crimping.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed
관련된 링크들
- TE Connectivity, DuraSeal Insulated Ring Terminal, M4 Stud Size, 0.5mm² to 1mm² Wire Size, Red
- TE Connectivity, DuraSeal Insulated Ring Terminal, M5 Stud Size, 0.5mm² to 1mm² Wire Size, Red
- TE Connectivity, DuraSeal Insulated Ring Terminal, M6 Stud Size, 0.5mm² to 1mm² Wire Size, Red
- TE Connectivity, DuraSeal Insulated Ring Terminal, M10 Stud Size, 0.5mm² to 1mm² Wire Size, Red
- TE Connectivity, DuraSeal Insulated Ring Terminal, M4 Stud Size, 1.5mm² to 2.5mm² Wire Size, Blue
- TE Connectivity, DuraSeal Insulated Ring Terminal, 6mm Stud Size, 0.5mm² to 1mm² Wire Size, Red
- TE Connectivity, DuraSeal Insulated Ring Terminal, 5mm Stud Size, 0.5mm² to 1mm² Wire Size, Red
- TE Connectivity, DuraSeal Insulated Ring Terminal, 4mm Stud Size, 0.5mm² to 1mm² Wire Size, Red