Raspberry Pi, Pi NoIR Series, Camera Module, CSI-2, 3280 x 2464 pixel
- RS 제품 번호:
- 913-2673
- 제조사 부품 번호:
- RASPBERRY PI NOIR CAMERA MODULE V2
- 제조업체:
- Raspberry Pi
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩30,004.80
재고있음
- 183 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩30,004.80 |
| 5 - 9 | ₩29,102.40 |
| 10 + | ₩28,237.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 913-2673
- 제조사 부품 번호:
- RASPBERRY PI NOIR CAMERA MODULE V2
- 제조업체:
- Raspberry Pi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Raspberry Pi | |
| Product Type | Camera Module | |
| Series | Pi NoIR | |
| Number of Channels | 1 | |
| Supported Bus Interfaces | CSI-2 | |
| Maximum Resolution | 3280 x 2464 pixel | |
| Minimum Operating Temperature | 60°C | |
| Maximum Frame Rate | 30fps | |
| Maximum Operating Temperature | -20°C | |
| Standards/Approvals | RoHS, BS EN 61340-5-1:2007, ANSI/ESD S20.20:2014 | |
| Width | 25 mm | |
| Length | 23.86mm | |
| Height | 9mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Raspberry Pi | ||
Product Type Camera Module | ||
Series Pi NoIR | ||
Number of Channels 1 | ||
Supported Bus Interfaces CSI-2 | ||
Maximum Resolution 3280 x 2464 pixel | ||
Minimum Operating Temperature 60°C | ||
Maximum Frame Rate 30fps | ||
Maximum Operating Temperature -20°C | ||
Standards/Approvals RoHS, BS EN 61340-5-1:2007, ANSI/ESD S20.20:2014 | ||
Width 25 mm | ||
Length 23.86mm | ||
Height 9mm | ||
- COO (Country of Origin):
- GB
Raspberry Pi NoIR Bulk Camera Board V2
The Raspberry Pi NoIR board V2 camera module is single channel, 8 megapixels and supports CSI-2 bus interface. It has a maximum frame rate capture of 30fps. This high definition (HD) NoIR camera board connects to any Raspberry Pi or compute module, allowing you to create HD videos and still photographs. The Pi NoIR (No Infrared) is the same as the standard camera module but without an IR filter and thus it is great for photography and videography in the dark. It utilises the IMX219PQ image sensor from Sony, which offers high-speed video imaging and high sensitivity. It also offers reduced image contamination such as fixed pattern noise and smearing. To connect the NoIR camera module to pi, a 15cm ribbon cable is attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, we can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs.
Features and Benefits
15-pin ribbon cable
Automatic 50/60Hz luminance detection
Automatic black level calibration
Automatic exposure control, white balance and band filter
High data capability
High-quality imagery
No IR filter
Operating temperature ranges between -20°C and 60°C
Supports 1080p, 720p60 and VGA90
Applications
Ideal for capturing HD videos and still photographs at night
Monitoring plant health and nocturnal animals
Certifications
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
관련된 링크들
- DFRobot, Raspberry Pi Camera Camera Module, USB 2.0, 3280 x 2464 pixel
- Raspberry Pi, Camera Module Camera Module, CSI-2
- Raspberry Pi, Pi Camera Series, Raspberry Pi Camera Camera Module, CSI-2, 12 MP
- Raspberry Pi, HQ Series, Camera Module Camera Module, CSI-2, 12 MP
- OKW Enclosures Plastic Raspberry Pi Case for use with Raspberry Pi Camera, Raspberry Pi NoIR Camera in Transparent
- OKW Enclosures Plastic Raspberry Pi Case for use with Raspberry Pi NoIR Camera, Raspberry Pi Camera in Black
- OKW Enclosures Case for use with Raspberry Pi Camera, Raspberry Pi NoIR Camera in Light Grey
- CGL, Camera Lens Camera Module, CSI-2