onsemi NCP12400CBAAB0DR2G, PWM Controller, 28 V, 65 kHz 7-Pin, SOIC
- RS 제품 번호:
- 178-4682P
- 제조사 부품 번호:
- NCP12400CBAAB0DR2G
- 제조업체:
- onsemi
대량 구매 할인 기용 가능
Subtotal 630 units (supplied on a reel)*
₩594,568.80
마지막 RS 재고
- 최종적인 870 개 unit(s)이 배송 준비 됨
수량 | 한팩당 |
|---|---|
| 630 - 1240 | ₩943.76 |
| 1250 + | ₩928.72 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 178-4682P
- 제조사 부품 번호:
- NCP12400CBAAB0DR2G
- 제조업체:
- onsemi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | onsemi | |
| Maximum Switching Frequency | 65 kHz | |
| Output Voltage | 14 V | |
| Output Current | 300 mA, 500 mA | |
| Number of Outputs | 1 | |
| Control Method | Current | |
| Mounting Type | Surface Mount | |
| Fall Time | 60ns | |
| Package Type | SOIC | |
| Rise Time | 70ns | |
| Topology | Flyback | |
| Pin Count | 7 | |
| Dimensions | 5 x 4 x 1.5mm | |
| Maximum Duty Cycle | 85% | |
| PWM Controller Type | Current Mode | |
| Length | 5mm | |
| Width | 4mm | |
| Height | 1.5mm | |
| Maximum Operating Supply Voltage | 28 V | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Temperature | -40 °C | |
| 모두 선택 | ||
|---|---|---|
브랜드 onsemi | ||
Maximum Switching Frequency 65 kHz | ||
Output Voltage 14 V | ||
Output Current 300 mA, 500 mA | ||
Number of Outputs 1 | ||
Control Method Current | ||
Mounting Type Surface Mount | ||
Fall Time 60ns | ||
Package Type SOIC | ||
Rise Time 70ns | ||
Topology Flyback | ||
Pin Count 7 | ||
Dimensions 5 x 4 x 1.5mm | ||
Maximum Duty Cycle 85% | ||
PWM Controller Type Current Mode | ||
Length 5mm | ||
Width 4mm | ||
Height 1.5mm | ||
Maximum Operating Supply Voltage 28 V | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Temperature -40 °C | ||
- COO (Country of Origin):
- PH
The NCP12400 is a new fixed−frequency current−mode controller featuring the Dynamic Self−Supply. This function greatly simplifies the design of the auxiliary supply and the VCC capacitor by activating the internal startup current source to supply the controller during start−up, transients, latch, stand−by etc. This device contains a special HV detector which detects the application unplug from the ac input line and triggers the X2 discharge current. This HV structure allows the brown−out detection as well. It features a timer−based fault detection that ensures the detection of overload and an adjustable compensation to help keep the maximum power independent of the input voltage.
Reduces Overall System Cost and Complexity
Ensures Skip Mode Operation Outside Audible Range
Average Efficiency Meets CoC Tier 2 Compliance
Configurable Protection Tailored for Application Needs
Ensures Skip Mode Operation Outside Audible Range
Average Efficiency Meets CoC Tier 2 Compliance
Configurable Protection Tailored for Application Needs