STMicroelectronics 5 PWM Controller, 75 kHz 20 V 20-Pin, SO-8
- RS 제품 번호:
- 175-1753P
- 제조사 부품 번호:
- STCMB1
- 제조업체:
- STMicroelectronics
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 10 units (supplied in a tube)*
₩62,792.00
재고있음
- 1,776 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 10 - 18 | ₩6,279.20 |
| 20 + | ₩6,185.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 175-1753P
- 제조사 부품 번호:
- STCMB1
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Maximum Switching Frequency | 75kHz | |
| Product Type | PWM Controller | |
| Start-up Supply Current | 100μA | |
| Supply Current | 6mA | |
| Output Voltage | 5.2 V | |
| Zero Power Detection | No | |
| Number of Outputs | 5 | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 10V | |
| Package Type | SO-8 | |
| Maximum Supply Voltage | 20V | |
| Pin Count | 20 | |
| Maximum Duty Cycle | 50% | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 2.65mm | |
| Length | 13mm | |
| Width | 7 mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Maximum Switching Frequency 75kHz | ||
Product Type PWM Controller | ||
Start-up Supply Current 100μA | ||
Supply Current 6mA | ||
Output Voltage 5.2 V | ||
Zero Power Detection No | ||
Number of Outputs 5 | ||
Mount Type Surface | ||
Minimum Supply Voltage 10V | ||
Package Type SO-8 | ||
Maximum Supply Voltage 20V | ||
Pin Count 20 | ||
Maximum Duty Cycle 50% | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 2.65mm | ||
Length 13mm | ||
Width 7 mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
- COO (Country of Origin):
- PH
The STCMB1 device embodies a transition mode (TM) PFC, a high voltage double-ended controller for LLC resonant half-bridge, an 800 V-rated high voltage section and the glue logic that supervises the operation of these three blocks. The PFC section uses a proprietary constant on-time control methodology that does not require a sinusoidal input reference, thereby reducing the system cost and external component count.
800 V high voltage start-up with integrated
Active input filter capacitor discharge circuitry for reduced standby power
Independent debug mode for both converters
Enhanced constant on-time PFC with input voltage feedforward, THD optimizer
Complete set of protections: ac brown-in/out, inrush control, OVP, OCP, inductor saturation, feedback disconnection
Half-bridge operation up to 750 kHz with self-adjusting deadtime
(HSP) function for anti-capacitive mode
Synchronous burst mode operation