ROHM 7-Pin, DIP-7K BM2P241W-Z PWM Controller, 650V
- RS 제품 번호:
- 264-705
- 제조사 부품 번호:
- BM2P241W-Z
- 제조업체:
- ROHM
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 pack of 5 units)*
₩16,480.00
재고있음
- 100 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 5 - 45 | ₩3,296.00 | ₩16,480.00 |
| 50 - 95 | ₩3,128.00 | ₩15,640.00 |
| 100 - 495 | ₩2,900.00 | ₩14,500.00 |
| 500 - 995 | ₩2,668.00 | ₩13,340.00 |
| 1000 + | ₩2,568.00 | ₩12,840.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 264-705
- 제조사 부품 번호:
- BM2P241W-Z
- 제조업체:
- ROHM
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | ROHM | |
| Product Type | PWM Controller | |
| Start-up Supply Current | 850μA | |
| Supply Current | 850μA | |
| Output Voltage | 10V | |
| Output Current | 1.61A | |
| Minimum Supply Voltage | 9.5V | |
| Package Type | DIP-7K | |
| Topology | Back Converter | |
| Maximum Supply Voltage | 650V | |
| Pin Count | 7 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Duty Cycle | 45% | |
| PWM Controller Type | Current Mode | |
| Maximum Operating Temperature | 105°C | |
| Height | 8.63mm | |
| Width | 6.35mm | |
| Length | 9.27mm | |
| Series | BM2Pxx1W-Z | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 ROHM | ||
Product Type PWM Controller | ||
Start-up Supply Current 850μA | ||
Supply Current 850μA | ||
Output Voltage 10V | ||
Output Current 1.61A | ||
Minimum Supply Voltage 9.5V | ||
Package Type DIP-7K | ||
Topology Back Converter | ||
Maximum Supply Voltage 650V | ||
Pin Count 7 | ||
Minimum Operating Temperature -40°C | ||
Maximum Duty Cycle 45% | ||
PWM Controller Type Current Mode | ||
Maximum Operating Temperature 105°C | ||
Height 8.63mm | ||
Width 6.35mm | ||
Length 9.27mm | ||
Series BM2Pxx1W-Z | ||
Standards/Approvals No | ||
Automotive Standard No | ||
The ROHM PWM type DC or DC converter for AC or DC provides an optimum system for all products that include an electrical outlet. It enables simpler design of a high effective converter specializing in non-isolation. By a built-in startup circuit that tolerates 650 V, this IC contributes to low power consumption. A current detection resistor as internal device realizes the small power supply designs. Since a current mode control is utilized, the current can be restricted in each cycle and an excellent performance is demonstrated in the bandwidth and transient response. The switching frequency is fixed to 65 kHz. A frequency hopping function is also on chip, and it contributes to low EMI. In addition, a built-in Super Junction MOSFET which tolerates 650 V makes the design easy.
PWM Current Mode Method
Frequency Hopping Function
Burst Operation at Light Load
Built-in 650 V Startup Circuit
Built-in 650 V Super Junction MOSFET
VCC UVLO (Under Voltage Lockout)
VCC OVP (Over Voltage Protection)
Over Current Detection Function per Cycle
Soft Start Function
관련된 링크들
- ROHM 7-Pin, DIP-7K BM2P181S-Z PWM Controller, 650V
- ROHM, DC/DC Controller 7-Pin, DIP-7AK BM2P061E-Z
- ROHM BM2 MOSFET, 7-Pin DIP-7AK BM2P061H-Z
- ROHM BM2 MOSFET, 7-Pin DIP-7K BM2P137QK-Z
- ROHM, AC/DC Converter 7-Pin, DIP-7AK BM2P104E-Z
- ROHM BM2P101H-Z, 5-Channel DC/DC Converter 7-Pin, DIP-7AK
- ROHM BM2P131H-Z, 1-Channel DC/DC Converter 7-Pin, DIP-7AK
- ROHM BM2PDB1Y-Z, 5-Channel DC/DC Converter 7-Pin, DIP-7K
