Omron Limit Switch

RS 제품 번호:: 265-4754
제조사 부품 번호:: D4N-1B20
제조업체:: Omron

Subtotal (1 unit)*

₩92,020.00

일시적 품절

2026년 12월 29일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩92,020.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 265-4754
제조사 부품 번호:: D4N-1B20
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	Limit Switch
	Standards/Approvals	CSA C22.2 No.14, UL508

	모두 선택
	브랜드 Omron
	Product Type Limit Switch
	Standards/Approvals CSA C22.2 No.14, UL508

COO (Country of Origin):: JP

Omron Limit Switch, Industrial Use - D4N-1B20

This limit switch is a compact, industrial mechanical sensor designed to detect position changes and provide reliable switching for automation and control equipment. Engineered for environments where sealed performance matters, it offers multiple actuator styles and contact arrangements to suit safety and general-purpose roles. The product supports direct-opening mechanisms and can be installed with a variety of conduit or M12 connector options to simplify wiring and maintenance.

Features & Benefits

• IP67-rated sealing for protection against dust and temporary immersion
• Direct-opening NC contact for positive contact separation
• Mechanical durability of at least 15,000,000 operations
• Electrical durability up to 500,000 operations for 3A at 250 VAC
• Contact resistance maximum 25 mΩ for consistent signal integrity
• Operating temperature range −30°C to 70°C for wide ambient use

Applications

• Suitable for industrial conveyor end-of-travel detection
• Ideal for safety interlocks on access doors and guards
• Used with hoists and lifts requiring position feedback
• Can be used for machine-tool limit sensing in production lines
• Suitable for retrofitting older control panels as a replacement switch

What contact forms and switching patterns are available?

The internal modules include snap-action and slow-action types with 1 NC/1 NO, 2 NC, 2 NC/1 NO, 3 NC and make-before-break variants to match different control logic requirements.

How should it be wired to maintain the sealed rating?

Use recommended connectors or conduit adaptors with correct seal packing and tighten to the specified torque

for 1/2-14 NPT types, apply sealing tape to ensure IP67 performance.

What are the applicable electrical ratings for control circuits?

The switch meets AC and DC utilisation categories with rated currents such as 10A at 120 VAC and 3A at 240 VAC for typical switching loads

use a 10A gI or gG fuse for short-circuit protection to meet specified ratings.

How does the mechanism address contact sticking from metal deposition?

A direct-opening mechanism forces NC contacts apart via the plunger action so separation occurs even when metal transfer has occurred, preserving safety-oriented operation.

What environmental limits affect installation choice?

Avoid locations with explosive or corrosive gases, constant oil/water splashing or extreme condensation

the head is not impervious to fine particle ingress so protective placement is recommended.